MWM2X-R010 Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – SM POWER RESISTORS, 1/2W - 5W, .0005Ω - 1MΩ WIREWOUND, FILM, & METAL PLATE

SM POWER RESISTORS, 1/2W - 5W, .0005Ω - 1MΩ
WIREWOUND, FILM, & METAL PLATE
MWM SERIES
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
RESISTORS CAPACITORS COILS DELAY LINES
RCD1M0W0^ΩM12%
Widest selection in the industry!
Tolerance to ±0.01%, T.C. to ±5ppm/°C
Available on exclusive SWIFT ^TM delivery program!
OPTIONS
Option X: Non-inductive (refer to application note below)
Option P: Increased Pulse Capability
Option M: Power metal film element
Option L: Low profile non-inductive metal plate design
Option E: Low thermal EMF design
Special marking, high current, flame retardant, fusible,
temp.sensitive, hi-rel screening/burn-in, fusible, SnPb, etc.
→_D←
← G→
A
↑
B
↓
↓
↑_{.010” MWM2 & 3S, .050” MWM3 & 5}
C
------
------
← E→
H
↑ _SUGGESTED
F
↓
PAD LAYOUT
Exceptional perfomance and reliability is
achieved via highest grade materials and
processing. An all-welded wirewound construction is standard,
featuring premium-grade wire for superior stability and surge
capability. Opt. L low profile models feature a non-inductive metal
plate element. The power film version (Opt.M) achieves values as high
as 1MΩ and is inherently low inductance thereby enabling stable
operation at high frequencies.
PERFORMANCE (Typ) WW & Opt. L Metal Plate
Opt. M Film Element
Load Life (1000 hrs)
±1% (MWM2S,3S,27=2%)
±1%
Moisture Resistance
±0.25%
0.5%
Temperature Cycling
±0.2%
0.5%
Short Time Overload
5 x rated W for 5 Sec
5 x rated W for .5 Sec
Temp. Coefficient
R0005-R024
R025-R049
R050-R099
R100-R990
1R00-9R90
10R0 & above
Dielectric Strength ¹
Solderability ²
Standard Optional
400ppm 100, 200
300ppm 100, 200
200ppm 50, 100
90ppm 20,30,50
50ppm 10,20,30
30ppm
5,10,20
500V Min.¹, 1KV avail.
95% coverage
Standard Optional
n/a
n/a
n/a
n/a
n/a
n/a
350ppm 200
200ppm 100
100ppm 25,50
500V Min. (1KV avail.)
95% coverage
Operating Temp.
-55 to +175°C(+275° avail)
-55°C to +175°C
Available Resis. Tol.
0.01% to 10%
0.5% to 5%
1 _{Dielectric strength for low profile Opt. L is 100V ( 300V avail)} 2 _{Tested within .032" [.8mm] of pcb surface}
RCD
TYPE
Wattage
Rating
Max
Voltage*
[Current]
Std Resis
Range
Opt M Opt M
Resis Max.
Range Voltage
A
MWM1/2 0.5W 33V [10A] .01Ω - 2K 5Ω - 1M 200V* .204±.02 [5.2 ±.5]
MWM1 1W 58V [20A] .001Ω-10K .1Ω - 1M 200V* .258±.02 [6.55±.5]
MWM2 2W 120V [30A] .002Ω-25K .1Ω - 1M 250V* .449±.032 [11.4±.8]
MWM2S 2W 80V [25A] .1Ω- 200Ω 1Ω - 1M 250V* .297 ±.020 [7.5 ±.5]
MWM27 2.7W 180V [30A] .005Ω -20K 1Ω - 1M 250V* .480±.032 [12.2±.8]
MWM3S 3W 200V [30A] .005Ω -25K 1Ω - 1M 300V* .625±.032 [15.9±.8]
MWM3 3.5W 250V [30A] .005Ω -50K 1Ω - 1M 350V* .811±.020 [20.6±.5]
MWM5 5W 300V [32A] .005Ω-100K n/a n/a .811±.020 [20.6±.5]
B (Max)
.111 [2.82]
.125 [3.17]
.208 [5.28]
.165 [4.19]
.230 [5.84]
.270 [6.86]
.295 [7.49]
.295 [7.49]
DIMENSIONS Inch [mm]
C
.125±.01 [3.2±.25]
.150±.015 [3.8±.4]
.225±.015 [5.7±.4]
.150±.015 [3.8±.4]
.228±.016 [5.8±.4]
.275±.015 [7±.38]
.273±.02 [6.9 ±.5]
.273±.02 [6.9± .5]
D (Min)
E
F
G
H
.025 [.63] .045±.015 [1.14±.4] .080 [2.0] .100 [2.5] .08 [2]
.032 [0.8] .060±.015 [1.50±.4] .100 [2.5] .125 [3.2] .12 [3]
.060 [1.5] .070±.020 [1.78±.5] .160 [4.0] .157 [4.0] .20 [5]
.044 [1.1] .050±.016 [1.27±.4] .100 [2.5] .125 [3.2] .14 [3.6]
.05 [1.27] .070±.020 [1.78±.5] .160 [4.0] .18 [4.57] .20 [5]
.05 [1.27] .085±.016 [2.16±.4] .160 [4.0] .175 [4.5] .40 [10]
.063 [1.6] .102±.028 [2.6 ± .7] .200 [5.0] .200 [5.0] .60 [15]
.063 [1.6] .102±.028 [2.6 ± .7] .250 [6.4] .250 [6.4] .60 [15]
LOW PROFILE METAL PLATE MODELS
MWM1/2L 0.5W √(PR) [12A] .003Ω-.05Ω n/a
MWM1L 1W √(PR) [25A] .001Ω-0.1Ω n/a
MWM2L 2W √(PR) [30A] .002Ω-0.2Ω n/a
MWM2LS 2W √(PR) [45A] .0005 -.005Ω n/a
n/a .200 ±.012 [5.1 ±.3] .053 [1.35] .100±.01 [2.54±.25] .025 [.63]
n/a .250 ±.012 [6.3 ±.3] .057 [1.45] .126 ±.012 [3.2 ±.3] .025 [.63]
n/a .330±.012 [8.38±.3] .057 [1.45] .157 ±.012 [4.0 ±.3] .032 [0.8]
n/a .250 ±.012 [6.3 ±.3] .079 [2.0] .126 ±.012 [3.2 ±.3] .032 [0.8]
.060 [1.5] min
.070 [1.8] min
.100 [2.5] min
.080[.20] min
*Voltage determined by E = √PR , E not to exceed maximum voltage rating. Increased ratings available. Multiply by 0.7 for Opt. X
.080 [2.0] .100 [2.5] .08 [2]
.150 [3.8] .125 [3.2] .120 [3]
.197 [5.0] .157 [4.0] .157 [4]
.150[3.8] .125[3.2] .120[.3]
APPLICATION NOTES:
1. Power Rating: Resistors may be operated up to full rated power with
consideration of mounting density, pad & trace geometery, PCB material, and
ambient temperature. Standard parts should be derated (W&V) by .67%/°C
when ambient exceeds 25°C, low profile parts by 1%/ °C above 70 °C
2. Inductance: Standard wound parts are 1 - 20uH typ. For “non-inductive”
design, specify Opt.X (0.2uH max ≤50Ω, .37uH >50Ω, 50nH avail). Opt. L
(metal plate element) and Opt.M (power film element) are inherently low
inductance (1 to 10nH typ). Consult factory for assistance.
3. Pulse Capability: standard MWM (wirewound) and Opt. L (metal plate)
offer excellent overload capability greatly exceeding that of film resistors.
The overload level can often be economically enhanced by a factor of 50%
or more via special processing (Opt.P). Pulse capability is highly dependent
on size & resistance (available up to 50 joules). Consult factory for assistance.
P/N DESIGNATION:
MWM2 - 1001 - F T W
RCD Type
Options: X,P,M,L,F,E (leave blank if std)
Resis.Code .01%-1%: 3 signif. figures & multiplier,
e.g. R010=0.01Ω, R100=0.1Ω, 1R00=1Ω, 1000=100Ω, 1001=1K.
Resis.Code 2%-10%: 2 signif. figures & multiplier, R01=0.01Ω,
R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K.
Use extra digits as needed: R005, R0075, R012, etc.
Tolerance Code: K=10%, J=5%, H=3%, G=2%, F=1%,
D=0.5%, C=0.25%, B=0.1%, A=0.05%, Q=0.02%, T=0.01%
Packaging: B = Bulk, T = Tape & Reel
TC (leave blank if standard): 5 = 5ppm, 10 = 10ppm, 20=20ppm,
30=30ppm,50=50ppm, 101=100ppm, 201=200ppm, 301=300ppm
Termination: W= Lead-free, Q= Tin/Lead. Leave blank if either is
acceptable (RCD will select based on lowest price and quickest delivery).
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA015J Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
23