MC0201U Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – THICK FILM CHIP RESISTORS AND JUMPERS

THICK FILM CHIP RESISTORS AND JUMPERS
MC SERIES 50mW (0201) to 3W (2040)
Term.W is
RoHS
ZC SERIES ^compliant
Zero-ohm chip (1A - 25A)
RoHS
& 260°C
compatible
t
RESISTORS CAPACITORS COILS DELAY LINES
L
T
W
Industry’s widest selection & lowest prices-
0.1Ω to 22M, 50mW to 3W, 0.25% to 5%, TC’s to 50ppm
0402, 0603, 0805, 1206 sizes heavily stocked in 1% & 5%
(other sizes available from stock in many popular values)
Option V: +175° operating temperature
Option U: User-trimmable chips
Option P: Increased pulse capability
Military screening, custom values & TC, microwave design, etc.
RCD’s Series MC resistors utilize precision thick film technology
offering inherently low inductance, exceptional reliability and superior
performance. Heavy plating with NO LEACH^TM nickel barrier assures
superb solderability and long shelf life. State-of-the-art production line
enables the industry’s most precise accuracies (0.25% & 50ppm!)
thereby replacing more costly thin-film chips in many applications.
RCD offers low cost offshore assembly of SM and leaded PCB’s
(refer to RCD’s Assembly Services p.114 for more information).
RCD Type Wattage
MC, ZC Rating ¹
Std TC ²
ppm/°C,
typ.
Resis. Range
±0.5% Tol²
Standard
Resis. Range
±1% Tol ²
Standard
Resis. Range
±5% Tol ²
MC
Voltage
Rating ²
TYPE ZC
Jumper ³
Dimensions Inch [mm]
L
W
T
t
100
0201
.05W
200
400
10Ω to 22KΩ
22.1K to 1MΩ
10Ω to 1MΩ
25V
1 Amp Max. .024±.002 .012±.002 .010±.002 .006±.002
50mΩ Max. [0.6±.03] [.3±.03] [.25±.03] [.15±.05]
1- 9.1Ω ,1.1M- 2.2M
100
0402
Stock item
.063W
200
400
10Ω to 1MΩ
1Ω to 9.76Ω
10Ω to 1MΩ
50V
1 Amp Max. .040±.004 .020±.004 .014±.004 .010±.004
50mΩ Max. [1.00±.1] [.5±.1] [.35±.1] [.25±.1]
1- 9.1Ω ,1.1M- 4.7M
0603
Stock item
.1W
100
10Ω to 1M
200
400
10Ω to 1MΩ
1Ω to 9.76Ω
10Ω to 1MΩ
1- 9.1Ω ,1.1M- 10M
50V
1.5 Amp
Max.
50mΩ Max.
.061±.005
[1.55±.12]
.031±.004 .016±.006 .010±.006
[.8±.1] [.40±.15] [.25±.15]
100
0805
Stock item
.125W
200
400
10Ω to 1M
10Ω to 1MΩ
10Ω to 1MΩ
0.1-9.76Ω, 1.02M-10M 0.1-9.1Ω, 1.1M-20M
150V
2 Amp Max. .079±.005 .050±.006 .020±.006 .016±.008
50mΩ Max. [2.0±.15] [1.25±.15] [.50±.15] [.4±.2]
1206
.25W
100
10Ω to 1M
10Ω to 1MΩ
Stock item
200
1206B .50W
400
1.02M to 5.6M
10Ω to 5.6MΩ
0.1-9.76Ω, 5.62M-10M 0.1-9.1Ω, 6.2M-22M
200V
2 Amp Max. .126±.008 .061±.006 .024±.006 .020±.008
50mΩ Max. [3.2±.2] [1.55±.15] [.61±.15] [.51±.2]
1210
.33W
100
200
400
10Ω to 1M
10Ω to 1MΩ
1.02M to 5.6M
10Ω to 5.6MΩ
0.1-9.76Ω, 5.62M-10M 0.1-9.1Ω, 6.2M-22M
200V
3 Amp Max. .126±.008 .098±.008 .024±.008 .020±.010
50mΩ Max. [3.2±.2] [2.5±.2] [.6±.2] [.5±.25]
2010
.75W
100
200
400
10Ω to 1M
10Ω to 1MΩ
1.02M to 5.6M
10Ω to 5.6MΩ
0.1-9.76Ω, 5.62M-10M 0.1-9.1Ω, 6.2M-22M
200V
( 250V
Opt. P)
3 Amp Max. .197±.008 .102±.008 .024±.008 .020±.010
50mΩ Max. [5.0±.2] [2.6±.2] [.6±.2] [.50±.25]
2512
2512B
1.0W
2.0W
100
200
400
10Ω to 1M
10Ω to 1MΩ
1.02M to 5.6M
10Ω to 5.6MΩ
0.1-9.76Ω, 5.62M-10M 0.1-9.1Ω, 6.2M-22M
250V
( 350V
Opt. P)
4 Amp Max. .250±.01 .125±.010 .024±.008 .026±.012
50mΩ Max. [6.35±.25] [3.2±.25] [.6±.2] [.65±.3]⁴
100
2040 2.0/3.0* 200
400
10Ω to 1MΩ
10Ω to 1MΩ
1- 9.1Ω
350V
N/A
.201±.008 .402±.008 .024±.008 .055±.018
[5.1±.2] [10.2±.2] [.6±.2] [1.4±.46]
1 _{Operation at or near full rated power (especially >1W) involves consideration of mounting geometry (solder pad and trace area/thickness, etc.). Request FA2623 for suggested mounting pad layouts.}
. ² Extended resistance range available Most sizes available down to 0.01Ω 1%. ³ Up to 25A available. ⁴ Dim. t on MC2512B is .094[2.4] maximum.
TYPICAL PERFORMANCE
Thermal Shock (-55° to +125°C)
Overload (2.5x W, 5S, NTE 2x rated V)
Low Temp. Operation (-55°C)
High Temp. Exposure (125°C, 100hrs)
Resistance to Solder Heat
Moisture Resistance
Load Life(1000 hrs.)
Operating Temp. (+175°C Opt. V)
Derating (above 70°C)
0.2% ∆R
1% ∆R
0.2% ∆R
0.5% ∆R
0.2% ∆R
0.5% ∆R
1.0% ∆R
-55 to +155°C
Derate W & V by 1.18%/°C
P/N DESIGNATION:
MC 1206
- 2210 - F T W
RCD Type: MC or ZC
Chip Size: 0201 to 2040
Options: U, P, etc. (leave blank if std)
Resis. Code 0.25% to 1% Tol: 3 signif. digits & multiplier
(R100= .1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1KΩ)
5% Tol: 2 signif. digits & multiplier (R10=.1Ω, 1R0=1Ω, 100=10Ω,
101=100Ω, 102=1KΩ). Leave blank on ZC zero-ohm chips.
Tolerance:J=5%, F=1%, D=0.5%, C=0.25% Leave blank on ZC
zero-ohm chips. Opt.U trimmable chips W=±15%, M=±20%, U=0 to -30%.
Packaging: B=Bulk, T=Tape & Reel
Optional TC: 50=50ppm, 101=100ppm, 201=200ppm (leave blank if std)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
PULSE WITHSTAND CHART (increased pulse levels avail.)
500
100
10
1
1uS
10uS
100uS
1mS
Pulse Duration
10mS
MC2512P
MC2010P
MC1210P
MC1206P
MC0805P
MC0603P
MC0402P
100mS
Pulse capability is dependent on res. value, waveform, repetition, etc.
Chart is a general guide for Opt. P version, single or infrequent pulses,
with peak voltage levels not exceeding 150V for 0402 & 0603 size, 300V
for 0805, 400V for 1206 & 1210, 450V for 2010 & 2512. Max pulse
wattage for standard parts (w/o Opt.P) is 50% less, max pulse voltage
is 50V less. Increased pulse levels available. For improved performance
and reliability, pulse derating factor is recommended (30-50% typ., refer
to #R-42). Verify selection by evaluating under worst-case conditions.
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA033F Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
16