HP10P-10R0-F Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – ULTRA PRECISION RESISTORS TO 0.001% 0.25PPM

ULTRA PRECISION RESISTORS TO 0.001% 0.25PPM
HP SERIES- Metal Foil
VS SERIES- Thin Film
RoHS
Term.W is
RoHS compliant
& 260°C
process
compatible
RESISTORS CAPACITORS COILS DELAY LINES
Industry’s widest range and highest precision
Low inductance, capacitance, noise and thermal EMF
Through-hole and SM designs
VS16 is a dual resistor design (TC tracking to 1ppm avail.)
Available on exclusive SWIFT^TM delivery program!
OPTIONS
Option GW: gullwing SM lead forming (avail. on 24mm T&R)
Option EQ: 24 hour burn in (or ER -100 hour burn in)
Numerous additional options available including custom
marking, matched sets, military screening, etc.
←
New low cost conformal
coated (type VS11)
Nichrosil Metal Foil - Unsurpassed Performance
Series HP resistors feature a metal foil construction for the most
demanding applications. Series VS feature a thin film construction
which enables excellent performance across a wide range of values,
offering a viable alternative to precision wirewound resistors. Superlow
TC’s, up to 20× better than Mil p/n RNC90Y requirements, provide
new opportunities for design engineers. HP10 is hermetically
sealed in a metal case, all others are epoxy encased or coated.
SPECIFICATIONS
RCD
Type
Power
Rating
@70°C
Volt
Rating
Resis.
Range¹
FIG
A BCD
Max. Max. Max. ±.01
VS1
VS11
VS15
.25W
.25W
.3W
250V 10Ω -500K 1,5
250V 10Ω -150K 4
300V 10Ω -3M 1,5
.320 .345 .120 .150
.240 .354 .100 .100
.305 .305 .105 .200
VS16 .15W ² 300V 10Ω -1.5M 3,5 .305 .305 .105 .100
VS2 .6W 300V 10Ω -1M 1,5 .320 .345 .120
VS3 .7W 300V 30Ω -3M 1 .610 .365 .160
VS4 1.0W 350V 30Ω -5M 1 .585 .545 .160
VS5 1.5W 350V 50Ω -7M 1 .820 .545 .160
VS55 1W 400V 10Ω -10M 1 1.120 .400 .260
VS6 2.0W 500V 100Ω -10M 1 1.120 .400 .260
HP7 .3W 300V 10Ω -25K 1,5 .320 .400 .120
HP10 .6W 300V 10Ω-60K 2 .455 .530 .200
1 _{Consult factory for resistance values as low as 1Ω or as high as 100MΩ.}
2 _{VS16 wattage rating is per resistor, package power rating is 0.3W}
.150
.400
.400
.650
.900
.900
.150
.150
FIG. 1
FIG. 2
FIG. 3
FIG. 4
|← A →|
↑
1.00
[25.4]
Min.
→| C |←
↑
B
↓
.[0.6235_{→] ←}
|← A →| _{→| C |←}
↑
B
|← A →|
↑
1.00
[25.4]
Min.
↓
.[0.6235_{→] ←}
↑
1.00
[25.4]
Min.
→| C |←
↑
B
|← A →| →| C |←
↑
B
↓
.[0.6235_{→] ←}
↓
.1^↑20
.020w
min.
.012t
↓
→
D
←
typ.
↓
→ D←
↓
→ D←
↓
→_D ←
FIG. 5 Option GW (GULLWING)
Available on VS1, VS2, VS15, VS16, & HP7
.100
.200
VS1GW,
VS2GW,
HP7GW
.075
.15
1111122222
111112222233333
.07 .08
VS15GW
.075
.15
1111122222
111112222233333
VS16GW
.075
.15
1111122222
111112222233333
1111122222
.07 .13
.07 .03
PERFORMANCE CHARACTERISTICS
Condition
HP10 Max.
HP7 & VS
Series**
TC (ppm/°C)***
.25/.5/1/3/5 1/2/3/5/10/25/50
Resistance Tol.
.001% to .1% .005% to 1%
MIL RNC90Y
5ppm
.005% to 1%
2000hr Load 125°C
±.02%
±.05%
±.05%
Overload
±.01%
±.01%
±.05%
Moisture Resistance
±.01%
±.03%
±.05%
Shock, Vibration
±.01%
±.01%
±.01%, ±.02%
Voltage Coefficient
.1ppm/V
2ppm/V
5ppm/V
Shelf Life (1 year)
5ppm
25ppm
-
Thermal EMF
.0 5 µV /°C
0 .1 µV /°C
-
Rise Time
1nS
1nS
-
Inductance
.1µH
.1µH
-
C a p a c i ta nc e
1.0pF
1.0pF
-
Current Noise
-30dB
-30dB
-
D e ra ti ng
Derate W & V ratings by .909%/°C from 70 to
125°C, and 1%/°C from 125° to 175°C (full rated
wattage @ 70°C, half wattage @125°C, zero
wattage @175°C)
* Per MIL-R-55182/9 100Ω to 100KΩ (Consult factory if outside this range.)
** Data is typical for all VS sizes except VS1 which meets MIL-R10509 Char E.
***TC is measured -55°C to +125°C for TC’s > 5ppm, -20°C to +85°C for TC’s 0.5 to 5ppm,
and 20°C to +60°C for 0.25ppm.
COMPARISON
RCD Series VS & HP
Film & Foil Resistors
RCD PC451
Wirewound
Inductance
Capacitance
Rise Time
Stability
High Frequency
Cost Advantage
Very Low
Very Low
Very Fast
Excellent
Excellent
High values, high volume,
high frequency circuits
High*
High*
Slow*
Excellent
Poor*
Low values, small
volume
* Largely dependent on resistance value (non-inductive and high-speed winding available.)
P/N DESIGNATION:
HP10
- 1001 - F T 5 W
RCD Type
Options: P, H, GW, ER, EQ (leave blank if std)
Resis. Code: 3 signif. figures & multiplier (10R0= 10Ω,
1000= 100Ω, 1001=1KΩ,1002=10K, 1003=100K). When
VS16 contains 2 different values, separate with / (e.g. 903/103)
Tolerance Code: F=1%, D=0.5%, C=0.25%, B=0.1%,
A=0.05%, Q=0.02%, T=0.01%, V=.005%, S=.001%
Ratio Tolerance (VS16 only): V=0.005%, Y=0.01%, Q=0.02%,
A=0.05%, Z=.1%,C=.25%, D=.5%, F=1%, G=2% (leave blank if not req’d)
Packaging: B = Bulk, T = Tape & Reel
TC: .25=0.25ppm, .5=0.5ppm, 2=2ppm, 5=5ppm, 10=10ppm, 25=25ppm,
TC Tracking (VS16 only): 210=25ppm abs/10ppm track, 205=25ppm abs/
5ppm track, 105=10ppm abs/5ppm track, 102=10ppm abs/2ppm track,
53=5ppm abs/3ppm track, 52=5ppm abs/2ppm track, 51=5ppm abs/1ppm track.
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is
acceptable). Gold plated leads also available on most sizes (specify code G)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA098A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
59