ATS135-1R00-JB Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – TEMPERATURE SENSITIVE PRECISION WIREWOUND RESISTORS TCR’S FROM +80 TO +6000 PPM

TEMPERATURE SENSITIVE
PRECISION WIREWOUND RESISTORS
TCR’S FROM +80 TO +6000 PPM
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
ATB SERIES- AXIAL LEAD, EPOXY
ATS SERIES- AXIAL LEAD, SILICONE
PTB SERIES- RADIAL LEAD, EPOXY
RESISTORS CAPACITORS COILS DELAY LINES
Industry’s widest range of positive TCR resistors!
Available on exclusive SWIFT ^TM delivery program!
Additional sizes available--most popular shown below
Choice of 15 standard temperature coefficients per Table 1
RCD’s AT and PT Series resistors offer inherent wirewound
reliability and precision performance in all types of temperature
sensing or compensating circuits. Sensors are wound with
various alloys to achieve wide range of temperature sensitivity.
ATS SERIES 350°C RATING
RCD ATS Series offer precision wirewound resistor performance
at economical pricing. Ceramic core and silicone coating
provide high operating temperature. The coating ensures
maximum protection from environmental and mechanical
damage (envir.
performance per
MIL-PRF-26).
RCD
Type
Body
Length
±.031 [.8]
Body
Diameter
±.015 [.4]
ATS110 .250 [6.35] .093 [2.36]
ATS125 .406 [10.3] .093 [2.36]
ATS135 .500 [12.7] .188 [4.78]
ATS145 .812 [20.6] .188 [4.78]
ATS150 .500 [12.7] .218 [5.54]
ATS155 .625 [15.9] .250 [6.35]
ATS160 .875 [22.2] .312 [7.92]
ATS170 1.220 [31.0] .312 [7.92]
ATS175 1.780 [45.2] .375 [9.53]
Lead
Diameter
(typ)
Wattage
@ 25°C
.020 [.51] .5
.020 [.51] 1.0
.032 [.81] 3.0
.032 [.81] 3.5
.040 [1.02] 3.5
.040 [1.02] 4.0
.040 [1.02] 5.0
.040 [1.02] 7.0
.040 [1.02] 10.0
4500ppm
Resis.
Range
1Ω - 300Ω
1Ω - 1KΩ
1Ω - 1.5K
1Ω - 3K
1Ω - 2K
1Ω - 3K
1Ω - 4K
1Ω - 5K
1Ω - 10K
ATB SERIES 175°C RATING
RCD ATB Series are typically multi-layer bobbin-wound enabling
higher resistance values. Encapsulated in moisture-proof epoxy,
Series ATB meets the environmental requirements of MIL-R-93.
Operating temperature range is -55°C to +175°C. Standard
tolerances are
±0.1%, ±0.25%,
±0.5%, ±1%.
RCD
Type
Body
Length
±.031 [.8]
Body
Diameter
±.015 [.4]
Lead
Diameter
(typ)
Wattage
@ 25°C
4500ppm
Resis.
Range
ATB200 .250 [6.35] .100 [2.54] .020 [.51] .05
1Ω - 3K
ATB202 .250 [6.35] .125 [3.18] .025 [.635] .10
1Ω - 5K
ATB204 .375 [9.53] .142 [3.60] .025 [.635] .12
1Ω - 8K
ATB206 .375 [9.53] .187 [4.75] .025 [.635] .15 1Ω - 15K
ATB100 .350 [8.89] .250 [6.35] .032 [.81] .25 1Ω - 20K
ATB101 .500 [12.7] .250 [6.35] .032 [.81] .33 1Ω - 30K
ATB102 .750 [19.1] .250 [6.35] .032 [.81] .50 1Ω - 76K
ATB104 .750 [19.1] .375 [9.53] .032 [.81] .60 1Ω - 114K
PTB SERIES 175°C RATING
RCD PTB Series offer the same reliability and precision
performance as the ATB series
except in a radial lead design.
TABLE 1. SERIES ATB, ATS, ATB RESISTANCE RANGE
RCD
Type
Body
Length
±.031 [.8]
Body
±.015
Dia.
[.4]
Lead
Diameter
(typ.)
Lead
Spacing
±.015 [.4]
Watts
@25°C
4500ppm
Resis.
Range
PTB401 .312 [7.92] .250 [6.35] .025 [.64] .200 [5.08] .25 1Ω - 15K
PTB406 .500 [12.7] .375 [9.53] .032 [.81] .200 [5.08] .33 1Ω - 40K
P/N DESIGNATION:
RCD Type
ATS135 - 1000 - F B 452 W
Resis.Code ≤1%: 3 signif. figures & multiplier,
(1R00=1Ω,10R0=10Ω,1000=100Ω,1001=1K, etc.)
Resis.Code 2%-10%: 2 signif. figures & multiplier,
(1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K, etc.)
Tolerance @ 25°C: J=5%, H=3%, G=2%,
F=1%, D=0.5%, C=0.25%, B=0.1%
Packaging: B = Bulk, T = Tape & Reel (axial lead only)
Temperature Coefficient: 80 = 80ppm; 100ppm and
higher, use 3 digit code: 101 =100ppm, 452 =4500 ppm, etc.
Termination W= lead-free, Q= tin/lead (leave blank if either is acceptable,
in which case RCD will select based on lowest price and quickest
delivery)
Temp.
T.C.
Coef. Tolerance
(ppm/°C) (ppm/°C)
+80
±20
+100
±20
+140
±40
+180
±40
+400
±40
+650
±50
+1000
±100
+1400
±200
+2600
±200
+3200
±200
+3500
±300
+3850 (Pt)
±80
+3900 (Cu) ±300
+4500 (NiFe) ±300
+6000 (Ni) ±400
Resis. Range Multiplier
( x 4500ppm Res. Range)
5.3 _{In order to determine the}
5.3 _{available resistance range}
5.0 for each TC, use the
2.0 ^{multiplier times the 4500}
4.5 ^{ppm resistance range.}
2.0 _{Example: a resistor with a}
3.0 _{TC of +3200 ppm can be}
3.2 manufactured with a
3.3 ^{resistance value twice as}
2.0
high as the same resistor
with a TC of 4500 ppm.
2.7 _{A resistor with a TC of}
.4 +6000 ppm can only reach
.083 ^{a third of the resistance}
1.00
.33
value available with 4500
ppm wire.
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA079 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
85