500-XC6DT2 Datasheet, PDF (3/4 Pages) MTU Onsite Energy Corporation – Diesel Engine-Generator sET

3 ^{/ //  /} 500-XC6DT2
Application data
//  _Engine
Manufacturer
Model
Type
Arrangement
Displacement: Cu In (lit)
Bore: in (cm)
Stroke: in (cm)
Compression Ratio
Rated RPM
Engine Governor
Max Power: Standby: bhp (kWm)
Regulation
Frequency
Air Cleaner
//  _{Liquid Capacity (Lubrication)}
Total Oil System: gal (lit)
Engine Jacket Water Capacity: gal (lit)
System Coolant Capacity: gal (lit)
//  _Electrical
Electric Volts DC
Cold Cranking Amps Under 0°F (-17.8°C)
//  _{Fuel System}
Fuel Supply Connection Size
Fuel Return Connection Size
Maximum Fuel Lift: ft (m)
Recommended Fuel
Total Fuel Flow: gal/hr (lit/hr)
//  _{Fuel Consumption}
MTU Detroit Diesel
Series 60
(6063HK36)
4-Cycle
6-Inline
855 (14)
5.24 (13.3)
6.61 (16.8)
15:1
1,800
DDEC
760 (567)
±.25%
60 Hz
Dry
At 100% of Power Rating: gal/hr (lit/hr)
At 75% of Power Rating: gal/hr( lit/hr)
At 50% of Power Rating: gal/hr (lit/hr)
//  _{Cooling - Radiator System (Standby)}
Ambient Capacity of Radiator: °F (°C)
Max. Restriction of Cooling Air, Intake,
and Discharge Side of Rad.: in. H₂0 (kPa)
Water Pump Capacity: gpm (lit/min)
Heat Rejection to Coolant: BTUM (kW)
Heat Rejection to Air to Air: BTUM (kW)
Heat Radiated to Ambient: BTUM (kW)
35.6 (134.8)
26.8 (101.4)
18.7 (70.8)
122 (50)
0.5 (0.12)
111 (420)
9,650 (170)
8,200 (144)
6,421 (113)
//  _{Air Requirements}
9.5 (36)
6 (23)
27 (102)
Aspirating: *SCFM (m³/min)
Air Flow Required for Rad.
Cooled Unit: *SCFM (m³/min)
Air Flow Required for Heat
Exchanger/Remote Rad. based
on 25°F Rise: *SCFM (m³/min)
1,514 (43)
25,873 (733)
14,482 (413)
* Air density = 0.0739 lbm/ft³ (1.184 kg/m³)
24
950
//  _{Exhaust System}
3/4” NPT
1/2” NPT
7 (2.1)
Diesel #2
105.3 (399)
Gas Temp. (Stack): °F (°C)
Gas Volume at Stack
Temp: CFM (m³/min)
Maximum Allowable
Back Pressure: in. H₂0 (kPa)
1,030 (554)
4,227 (120)
40.8 (10.2)