375-JC6DT3 Datasheet, PDF (3/4 Pages) MTU Onsite Energy Corporation – DIESEL ENGINE-GENERATOR SET

3 ^{/ //  /} 375-JC6DT3
Application data
//  _Engine
Manufacturer
Model
Type
Arrangement
Displacement: Cu In (lit)
Bore: in (cm)
Stroke: in (cm)
Compression Ratio
Rated RPM
Engine Governor
Max Power: Standby: bhp (kWm)
Max Power: Prime: bhp (kWm)
Regulation
Frequency
Air Cleaner
//  _{Liquid Capacity (Lubrication)}
Total Oil System: gal (lit)
Engine Jacket Water Capacity: gal (lit)
System Coolant Capacity: gal (lit)
//  _Electrical
Electric Volts DC
Cold Cranking Amps Under 0°F (-17.8°C)
//  _{Fuel System}
Fuel Supply Connection Size
Fuel Return Connection Size
Maximum Fuel Lift: ft (m)
Recommended Fuel
Total Fuel Flow: gal/hr (lit/hr)
John Deere
6135HF485
4-Cycle
6-Inline
824 (13.5)
5.2 (13.2)
6.5 (16.5)
16:1
1,800
JDEC
617 (460)
561 (419)
±.25%
60 Hz
Dry
15.9 (60)
4.8 (18)
17.2 (65)
24
925
3/4” NPT
1/2” NPT
3.3 (1)
Diesel #2
51.7 (195.7)
//  _{Fuel Consumption}
At 100% of Power Rating: gal/hr (lit/hr)
At 75% of Power Rating: gal/hr( lit/hr)
At 50% of Power Rating: gal/hr (lit/hr)
STANDBY
27.2 (102.9)
20.6 (77.9)
13.9 (52.8)
PRIME
23.6 (89.38)
18 (68.28)
12.5 (47.17)
//  _{Cooling - Radiator System}
STANDBY
Ambient Capacity of Radiator: °F (°C) 122 (50)
Max. Restriction of Cooling Air, Intake,
and Discharge Side of Rad.: in. H₂0 (kPa) 0.5 (0.12)
Water Pump Capacity: gpm (lit/min)
124 (470)
Heat Rejection to Coolant: BTUM (kW) 11,849 (208)
Heat Rejection to Air to Air: BTUM (kW) 6,635 (117)
Heat Radiated to Ambient: BTUM (kW) 2,617 (46)
PRIME
122 (50)
0.5 (0.12)
124 (470)
10,637 (187)
6,062 (107)
2,204 (39)
//  _{Air Requirements}
Aspirating: *SCFM (m³/min)
Air Flow Required for Rad.
Cooled Unit: *SCFM (m³/min)
Air Flow Required for Heat
Exchanger/Remote Rad. based
on 25°F Rise: *SCFM (m³/min)
STANDBY
1,201 (34)
PRIME
1,130 (32)
21,766 (616) 21,766 (616)
5,902 (168) 4,970 (142)
* Air density = 0.0739 lbm/ft³ (1.184 kg/m³)
//  _{Exhaust System}
Gas Temp. (Stack): °F (°C)
Gas Volume at Stack
Temp: CFM (m³/min)
Maximum Allowable
Back Pressure: in. H₂0 (kPa)
STANDBY
880 (471)
PRIME
801 (427)
2,860 (81) 2,578 (73)
40 (10)
40 (10)