3250-XC6DT2 Datasheet, PDF (3/4 Pages) MTU Onsite Energy Corporation – DIESEL ENGINE-GENERATOR SET

3 ^{/ //  /} 3250-XC6DT2
Application data
//  _Engine
Manufacturer
Model
Type
Arrangement
Displacement: Cu In (lit)
Bore: in (cm)
Stroke: in (cm)
Compression Ratio
Rated RPM
Engine Governor
Max Power: Standby: bhp (kWm)
Max Power: Prime: bhp (kWm)
Regulation
Frequency
Air Cleaner
//  _{Liquid Capacity (Lubrication)}
Total Oil System: gal (lit)
Engine Jacket Water Capacity: gal (lit)
After Cooler Water Capacity: gal (lit)
System Coolant Capacity: gal (lit)
//  _Electrical
Electric Volts DC
Cold Cranking Amps Under 0°F (-17.8°C)
//  _{Fuel System}
Fuel Supply Connection Size
Fuel Return Connection Size
Maximum Fuel Lift: ft (m)
Recommended Fuel
Total Fuel Flow: gal/hr (lit/hr)
MTU Detroit Diesel
20V4000 G83L
4-Cycle
20-V
5,822 (95.4)
6.69 (17)
8.27 (21)
16.5:1
1,800
ADEC
4,678 (3,490)
4,035 (3,010)
±.25%
60 Hz
Dry
103 (390)
54.2 (205)
14.5 (55)
231 (873)
24
3,000
1” NPT
1” NPT
3 (1)
Diesel #2
349 (1,320)
//  _{Fuel Consumption}
At 100% of Power Rating: gal/hr (lit/hr)
At 75% of Power Rating: gal/hr( lit/hr)
At 50% of Power Rating: gal/hr (lit/hr)
STANDBY
237 (897)
192 (727)
133 (504)
PRIME
200 (757)
149 (564)
103 (390)
//  _{Cooling - Radiator System}
STANDBY PRIME
Ambient Capacity of Radiator: °F (°C) 108 (42)
108 (42)
Max. Restriction of Cooling Air, Intake,
and Discharge Side of Rad.: in. H₂0 (kPa) 0.5 (0.12) 0.5 (0.12)
Water Pump Capacity: gpm (lit/min)
440 (1,667) 440 (1,667)
After Cooler Pump
Capacity: gpm (lit/min)
163 (617) 163 (617)
Heat Rejection to Coolant: BTUM (kW) 83,030 (1,460) 67,675 (1,190)
Heat Rejection to After Cooler: BTUM (kW) 61,988 (1,090) 51,183 (900)
Heat Radiated to Ambient: BTUM (kW) 13,472 (237) 12,434 (218.6)
//  _{Air Requirements}
Aspirating: *SCFM (m³/min)
Air Flow Required for Rad.
Cooled Unit: *SCFM (m³/min)
Air Flow Required for Heat
Exchanger/Remote Rad. based
on 25°F Rise: *SCFM (m³/min)
STANDBY PRIME
9,111 (258) 8,687 (246)
135,369 (3,833) 135,369 (3,833)
30,384 (866) 28,431 (810)
* Air density = 0.0739 lbm/ft³ (1.184 kg/m³)
//  _{Exhaust System}
Gas Temp. (Stack): °F (°C)
Gas Volume at Stack
Temp: CFM (m³/min)
Maximum Allowable
Back Pressure: in. H₂0 (kPa)
STANDBY PRIME
1,013 (545) 914 (490)
26,062 (738) 22,884 (648)
34.1 (8.5) 34.1 (8.5)