FM25L512 Datasheet, PDF (1/13 Pages) Ramtron International Corporation – 512Kb FRAM Serial 3V Memory

Preliminary
FM25L512
512Kb FRAM Serial 3V Memory
Features
512K bit Ferroelectric Nonvolatile RAM
• Organized as 65,536 x 8 bits
• Unlimited Read/Write Cycles
• 10 Year Data Retention
• NoDelay™ Writes
• Advanced High-Reliability Ferroelectric Process
Very Fast Serial Peripheral Interface - SPI
• Up to 20 MHz Frequency
• Direct Hardware Replacement for EEPROM
• SPI Mode 0 & 3 (CPOL, CPHA=0,0 & 1,1)
Write Protection Scheme
• Hardware Protection
• Software Protection
Low Power Consumption
• Low Voltage Operation 3.0V – 3.6V
• 20 µA Standby Current
Industry Standard Configurations
• Industrial Temperature -40°C to +85°C
• 8-pin “Green”/RoHS TDFN Package
• Footprint Compatible with SOIC-8 (see pg 12)
Description
The FM25L512 is a 512-kilobit nonvolatile memory
employing an advanced ferroelectric process. A
ferroelectric random access memory or FRAM is
nonvolatile and performs reads and writes like a
RAM. It provides reliable data retention for 10 years
while eliminating the complexities, overhead, and
system level reliability problems caused by
EEPROM and other nonvolatile memories.
Unlike serial EEPROMs, the FM25L512 performs
write operations at bus speed. No write delays are
incurred. The next bus cycle may commence
immediately without the need for data polling. The
next bus cycle may start immediately. In addition, the
product offers virtually unlimited write endurance.
Also, FRAM exhibits much lower power
consumption than EEPROM.
These capabilities make the FM25L512 ideal for
nonvolatile memory applications requiring frequent
or rapid writes or low power operation. Examples
range from data collection, where the number of
write cycles may be critical, to demanding industrial
controls where the long write time of EEPROM can
cause data loss.
The FM25L512 provides substantial benefits to users
of serial EEPROM as a hardware drop-in
replacement. The FM25L512 uses the high-speed SPI
bus, which enhances the high-speed write capability
of FRAM technology. Device specifications are
guaranteed over an industrial temperature range of
-40°C to +85°C.
This is a product that has fixed target specifications but are subject
to change pending characterization results.
Rev. 1.2
Aug. 2007
Pin Configuration
Top View
/CS 1
SO 2
8 ^VDD
7 /HOLD
/WP ³
VSS ⁴
6 _SCK
5 _SI
Pin Name
/CS
/WP
/HOLD
SCK
SI
SO
VDD
VSS
Function
Chip Select
Write Protect
Hold
Serial Clock
Serial Data Input
Serial Data Output
Supply Voltage (3.0 to 3.6V)
Ground
Ordering Information
FM25L512-DG 8-pin “Green”/RoHS TDFN
Ramtron International Corporation
1850 Ramtron Drive, Colorado Springs, CO 80921
(800) 545-FRAM, [phone]
www.ramtron.com
Page 1 of 13