FM25C160 Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – 16Kb FRAM Serial Memory

AEC Q100 Grade 1 Compliant
FM25C160 – Automotive Temp.
16Kb FRAM Serial Memory
Features
16K bit Ferroelectric Nonvolatile RAM
• Organized as 2,048 x 8 bits
• High Endurance 1 Trillion (10¹²) Read/Writes
• NoDelay™ Writes
• Advanced High-Reliability Ferroelectric Process
Very Fast Serial Peripheral Interface - SPI
• Up to 15 MHz maximum Bus Frequency
• Direct hardware replacement for EEPROM
• SPI Mode 0 & 3 (CPOL, CPHA=0,0 & 1,1)
Sophisticated Write Protection Scheme
• Hardware Protection
• Software Protection
Low Power Consumption
• 10 µA Standby Current
Industry Standard Configuration
• Automotive Temperature -40° C to +125° C
o Qualified to AEC Q100 Specification
• “Green”/RoHS 8-pin SOIC
Description
The FM25C160 is a 16-kilobit nonvolatile memory
employing an advanced ferroelectric process. A
ferroelectric random access memory or FRAM is
nonvolatile but operates in other respects as a RAM.
It provides reliable data retention for years while
eliminating the complexities, overhead, and system
level reliability problems caused by EEPROM and
other nonvolatile memories.
Unlike serial EEPROMs, the FM25C160 performs
write operations at bus speed. No write delays are
incurred. Data is written to the memory array
immediately after it has been successfully transferred
to the device. The next bus cycle may commence
immediately. In addition, the product offers
substantial write endurance compared with other
nonvolatile memories. The FM25C160 is capable of
supporting up to 10¹² read/write cycles -- far more
than most systems will require from a serial memory.
These capabilities make the FM25C160 ideal for
nonvolatile memory applications requiring frequent
or rapid writes. Examples range from data collection,
where the number of write cycles may be critical, to
demanding automotive controls where the long write
time of EEPROM can cause data loss.
The FM25C160 provides substantial benefits to users
of serial EEPROM, in a hardware drop-in
replacement. The FM25C160 uses the high-speed SPI
bus, which enhances the high-speed write capability
of FRAM technology. The specifications are
guaranteed over an automotive temperature range of
-40°C to +125°C.
Pin Configuration
CS
1
SO
2
WP
3
VSS
4
8
VDD
7
HOLD
6
SCK
5
SI
Pin Name
/CS
/WP
/HOLD
SCK
SI
SO
VDD
VSS
Function
Chip Select
Write Protect
Hold
Serial Clock
Serial Data Input
Serial Data Output
5V
Ground
Ordering Information
FM25C160-GA “Green” 8-pin SOIC, Auto-
motive Grade 1
This product conforms to specifications per the terms of the Ramtron
standard warranty. The product has completed Ramtron’s internal
qualification testing and has reached production status.
Rev. 3.1
July 2007
Ramtron International Corporation
1850 Ramtron Drive, Colorado Springs, CO 80921
(800) 545-FRAM, [phone]
http://www.ramtron.com
Page 1 of 13