VS9P Datasheet, PDF (2/3 Pages) Raltron Electronics Corporation – LOW COST UHF/HF VCXO, LVPECL, +3.3 VDC

VCXO
Page 2 of 3
*1 Test Conditions Unless Stated Otherwise: Nominal Vcc, Nominal Load, +25 ±3°C
*2 Frequency Dependent
*3 May not be Available With All Temperature Ranges or Frequencies — Please Consult Factory
*4 Measured with Wavecrest SIA-3000A 10,000, Cycles no filtering
*5 Calculated from Agilent 5500 phase noise measurements
*6 Measured with Agilent 5500
*7 Tighter stabilities maybe available upon request – please consult factory
$ PART NUMBERING SYSTEM:
SERIES
SYMMETRY
TEMPERATURE
RANGE (°C)
VS9P: UHF +3.3Vdc A: 40/60 to 60/40% R: 0…+50
VCXO with LVPECL T: 45/55 to 55/45% S: 0…+70
Comp. Output
U: -20…+70
V: -40…+85
ABSOLUTE PULL
RANGE
K: ±20 ppm
I: ±25 ppm
F: ±32 ppm
H: ±50 ppm
G: ±80 ppm
J: ±100 ppm*(note 3)
FREQUENCY
(MHz)
0.75…800.000
Enable/Disable
Enable High – standard (Omit Suffix)
EL; Enable Low
EXAMPLE: VS9PASH -155.520
VCXO, 7x5mm Package, +3.3 VDC Supply Voltage, LVPECL Output, Standard Symmetry, 0…+70°C Operating
Temperature Range, ±50 ppm APR, 25 ppm stability, 155.520 MHz
$ MECHANICAL PARAMETERS:
INDICATES PIN 1.
.276 ±.008
7.0 ±0.2
.079 MAX.
2.00 MAX.
.200
5.08
.100
2.54
123
65
4
.055
1.40
TYP.
.079 TYP.
2.00 TYP.
.087
2.20
.071
.100
1.80
2.54
SOLDER PATTERN
OUTLINE TOLERANCE:
±0.006” / 0.15mm
(Unless otherwise specified)
PIN FUNCTIONS:
[1] VOLTAGE CONTROL
[2] ENABLE/ DISABLE, OR NO CONNECT
[3] CASE GROUND
[4] OUTPUT
[5] COMP. OUTPUT
[6] SUPPLY VOLTAGE
MARKING:
VS9PASH
155.52
RAL D/C
*0.01µF external by-pass
filter is recommended as seen on solder
pattern.
RALTRON ELECTRONICS CORP. ! 10651 N.W. 19^th St ! Miami, Florida 33172 ! U.S.A.
phone: [phone] ! fax: [phone] ! e-mail: [e-mail] ! WEB: http://www.raltron.com