OX6536A Datasheet, PDF (1/2 Pages) Raltron Electronics Corporation – OCXO

OCXO
OCXO SERIES 3000
n FEATURES
Small OCXO in EURO package
Frequencies up to 160 MHz
n ELECTRICAL PERFORMANCE
PARAMETER
Supply voltage, nom.
Power dissipation steady state
Heat up power
Heat up time.
Frequency range
Frequency Adjustment
Freq. stability vs. temperature
LX: 0°C to 60°C
FZ: -30°C to 70°C
D3: -40°C to 85°
OCXO SERIES 3000
AT CUT CRYSTAL
SC CUT CRYSTAL
12V, 5V ±5% Standard (3.3V Optional)
1.5 Watt Max.
3 Watt Max
3 min Max
1 To 160 MHz Standard
±10PPM Min (0 to 5V)
±0.7PPM Min (0 to 5V)
±0.05 PPM
±0.01 PPM
±0.1 PPM
±0.02 PPM
±0.25 PPM
±0.03 PPM
(Standard, contact factory for different temp ranges and stabilities)
Freq. stability vs. supply
changes
Freq. stability vs. load
changes
Long term stability (Aging)
Output
Harmonics, Sub Harmonics
Spurious
Duty cycle
Rise / fall time
Short term Stability (10MHz)
Phase Noise
(Sine Output 10MHZ – under
static conditions)
±0.015 PPM Max for ±5% Change ±0.010 PPM Max for ±5% Change
±0.01 PPM Max for ±5% Change ±0.005 PPM Max for ±5% Change
±4 PPM Max for 10 Years
±1 PPM Max for 10 Years
±0.005 PPM/Day Max.
±0.002 PPM/Day Max.
HCMOS/TTL/Sine 0 to +7dBm (Low voltage CMOS Available)
-30dBc(Sine Output)
-75dBc(Sine Output)
40/60% to 60/40%(HCMOS)
10nS Max. (HCMOS,10%~90%Vout, 90%~10%Vout)
1 E-10 /Sec
5 E-11 /Sec
Offset
Phase Noise
Offset
Phase Noise
10Hz
-90 dBc/Hz
10Hz
-110 dBc/Hz
100Hz -125 dBc/Hz
100Hz -130 dBc/Hz
1000Hz -135 dBc/Hz
1000Hz -140 dBc/Hz
10000Hz -150 dBc/Hz
10000Hz -150 dBc/Hz
Note: All Typical parameters for a 10MHz output and 5V Supply, for different frequencies consult factory
RALTRON ELECTRONICS CORP. § 10651 N.W. 19^th St § Miami, Florida 33172 § U.S.A.
phone: [phone] § fax: [phone] § e-mail: [e-mail] § internet: http:/www.raltron.com