OX6494A Datasheet, PDF (1/2 Pages) Raltron Electronics Corporation – OCXO SERIES 9400

OCXO
OCXO SERIES 9400
" FEATURES
APPLICATIONS
Excellent frequency stability
High Frequency up to 100MHz
Low Profile
- TELECOM
- BASE STATION
- INSTRUMENTATION
" ELECTRICAL PERFORMANCE
PARAMETER
Supply voltage, nom.
Power dissipation steady state
Heat up power
Heat up time.
Frequency range
Frequency Adjustment:
Electrical (0 to 5V)
Electrical (0 to 10V)
Freq. stability vs. temperature
LX: 0°C to 60°C
FZ: -30°C to 70°C
OCXO SERIES 9400
AT CUT CRYSTAL
SC CUT CRYSTAL
12V, 5V,3.3V ±5% Standard
2 Watt Max.
5 Watt Max.
5 min Max
10 To 100MHz Standard
±10PPM Min
±15PPM Min
±0.7PPM Min
±1PPM Min
±0.05 PPM
±0.010 PPM
±0.15 PPM
±0.020 PPM
(Standard, contact factory for different temp ranges and stabilities)
Freq. stability vs. supply
±0.01 PPM Max for ±5% Change ±0.005 PPM Max for ±5% Change
changes
Freq. stability vs. load changes ±0.005 PPM Max for ±5% Change ±0.002 PPM Max for ±5% Change
Long term stability (Aging)
± 0.5 PPM Max for 1 Years
±0.1 PPM Max for 1 Years
±0.005 PPM/Day Max.
±0.002 PPM/Day Max.
Output
HCMOS/TTL/Sine 0 to +10dBm
Harmonics, Sub Harmonics
-30dBc(Sine Output)
Spurious
-75dBc(Sine Output)
Duty cycle
40/60% to 60/40%(HCMOS)
Rise / fall time
10nS Max. (HCMOS,10%~90%Vout, 90%~10%Vout)
Short term Stability (10MHz)
1 E-10 /Sec
5 E-11 /Sec
Phase Noise typical under
Offset
Phase Noise
Offset
Phase Noise
static conditions
10Hz
-95 dBc/Hz
10Hz
-115 dBc/Hz
(Sine Output 10MHZ)
100Hz -125 dBc/Hz
100Hz -135 dBc/Hz
1000Hz -135 dBc/Hz
1000Hz -145 dBc/Hz
10000Hz -150 dBc/Hz
10000Hz -150 dBc/Hz
Note: All Typical parameters for a 10MHz output and 5V Supply, for different frequencies consult factory
RALTRON ELECTRONICS CORP. ! 10651 N.W. 19^th St ! Miami, Florida 33172 ! U.S.A.
phone: [phone] ! fax: [phone] ! e-mail: [e-mail] ! internet: http:/www.raltron.com