OX2000A Datasheet, PDF (1/2 Pages) Raltron Electronics Corporation – Miniature OCXO in standard 14-pin DIP package

OCXO
OCXO SERIES 2000
FEATURES
Miniature OCXO in standard 14-pin DIP package
Fast warm up
Frequencies up to 65 MHz
ELECTRICAL PERFORMANCE
PARAMETER
OCXO SERIES 2000
Supply voltage, nom.
5V ±5% (3.3V Optional)
Power dissipation steady state
1.5 Watt Max.
Heat up power
3 Watt Max
Heat up time.
3 min Max
Frequency range
1 To 65.536 MHz Standard
Frequency Adjustment
±5PPM Min (0 to 5V)
Freq. stability vs. temperature
LX: 0°C to 60°C ±0.10 PPM
FZ: -30°C to 70°C ±0.25 PPM
D3: -40°C to 85°C ±0.30 PPM
(Standard, contact factory for different temp ranges and stabilities)
Freq. stability vs. supply
±0.015 PPM Max for ±5% Change
changes
Freq. stability vs. load changes
±0.01 PPM Max for ±5% Change
Long term stability (Aging)
±4 PPM Max for 10 Years
±0.005 PPM/Day Max.
Output
HCMOS/TTL Standard (Low voltage CMOS Available)
Duty cycle
40/60% to 60/40%
Rise- / fall time
10nS Max. (10%~90%Vout, 90%~10%Vout)
Short term Stability (10MHz)
5 E-10 /1Sec
Phase Noise (Typical at
Offset
Phase Noise
10MHz under static
10Hz
-90 dBc/Hz
Conditions)
100Hz -125 dBc/Hz
1000Hz -135 dBc/Hz
10000Hz -140 dBc/Hz
Note: All Typical parameters for a 10MHz output and 5V Supply, for different frequencies consult factory
HOW TO ORDER (PART NUMBER)
Prefix Output Type Cut Type
OX
2:HCMOS
0:AT (No Vcontrol )
4:LVCMOS 4: AT (Elect Vcontrol)
Series
20:2000
Revision
A
Temperature Range
First letter Lowest
Temperature,
Second letter Highest
Temperature:
From A=-55°C to
Z=+70°C, Then:
1=+75°C, 2=+80°C,
3=+85°C… in 5°C
steps Example:
LZ: +0°C to +70°C
LX: +0°C to +60°C
FZ: -30°C to +70°C
D3: -40°C to +85°C
Stability
Value x
10E-2 in
PPM
Example
28=
0.28PP
M
10=
0.1PPM
Frequency
In MHZ
RALTRON ELECTRONICS CORP. 10651 N.W. 19^th St Miami, Florida 33172 U.S.A.
phone: [phone] fax: [phone] e-mail: [e-mail] internet: http:/www.raltron.com