CO6 Datasheet, PDF (1/2 Pages) Raltron Electronics Corporation – THROUGH HOLE CLOCK OSCILLATORS-HCMOS COMPATIBLE

THROUGH HOLE CLOCK OSCILLATORS-HCMOS COMPATIBLE
FEATURES
STANDARD 8 AND 14 PIN DIP PACKAGE
TOLERANCE AND STABILITY TO ± 25 PPM
EXCELLENT CLOCK FOR 16 AND 32 BIT PROCESSORS
LOW COST
AVAILABLE IN 3.3 VOLT
SERIES CO6 AND CO12
SPECIFICATIONS
SERIES
CO6
CO12
PACKAGE
14 PIN DIP
8 PIN DIP
FREQUENCY RANGE
500.00 KHz TO 125.00 MHz
500.00 KHz TO 125.00 MHz
CO6100 : ±100 PPM
CO12100 : ±100 PPM
FREQUENCY STABILITY†
CO6050 : ±50 PPM
CO12050 : ±50 PPM
CO6025 : ±25 PPM
CO12025 : ±25 PPM
OPERATING TEMPERATURE RANGE
0° C TO +70° C STANDARD
-40° C TO 85° C EXTENDED
0° C TO +70° C STANDARD
-40° C TO 85° C EXTENDED
STORAGE TEMPERATURE RANGE
-55° C TO +125° C
-55° C TO +125° C
VOLTAGE††
+5 VDC ±0.5 VDC
+5 VDC ±0.5 VDC
500 KHz TO 19.999 MHz: 20 mA
500 KHz TO 19.999 MHz: 20 mA
INPUT
CURRENT (MAX)
20 MHz TO 34.999 MHz: 30 mA
35 MHz TO 69.999 MHz: 40 mA
20 MHz TO 34.999 MHz: 30 mA
35 MHz TO 69.999 MHz: 40 mA
70 MHz TO 125 MHz: 60 mA
70 MHz TO 125 MHz: 60 mA
SYMMETRY
40 TO 60% NORMAL
45 TO 55% TIGHT
40 TO 60% NORMAL
45 TO 55% TIGHT
OUTPUT
RISE AND FALL TIME
(0.5 - 4.5 VDC)
UNDER 24 MHz : ±10 ns MAX
24 MHz TO 70 MHz : ±6 ns MAX
70 MHz TO 125 MHz : ±3 ns MAX
UNDER 24 MHz : ±10 ns MAX
24 MHz TO 70 MHz : ±6 ns MAX
70 MHz TO 125 MHz : ±3 ns MAX
LOGIC "0" LEVEL
+0.5 V MAX. (10% VDD)
+0.5 V MAX. (10% VDD)
LOGIC "1" LEVEL
+4.5 V MIN (90% VDD)
+4.5 V MIN (90% VDD)
LOAD†††
15 pF OR 10 LS TTL STANDARD
15 pF OR 10 LS TTL STANDARD
† FREQUENCY STABILITYINCLUSIVE OF ROOM TOLERANCE , FREQUENCYSTABILITYOVER TEMPERATURE,
10% POWER SUPPLY VARIATION, AGING, SHOCK, AND VIBRATION
†† +3.3 VOLT VERSION IS AVAILABLE. CONSULT RALTRON FOR SPECIFICATIONS
††† OUTPUT LOADS ALSO AVAILABLE AT 15 pF, 30 pF AND 50 pF. CONSULT RALTRON FOR SPECIFICATIONS
ENVIRONMENTAL AND TECHNICAL CONDITIONS
OUTPUT WAVEFORMS
ENVIRONMENTAL
TEMPERATURE CYCLE MIL-STD 883, METHOD 1010, 10 CYCLES -20° C TO 85° C
SHOCK
MIL-STD-202, METHOD 213, TEST CONDITION C
VIBRATION
RESISTANCE TO
SOLDERING HEAT
HUMIDITY
MIL-STD-202, METHOD 204, TEST CONDITION A
MIL-STD-202, METHOD 210, TEST CONDITION B
85% RELATIVE HUMIDITY AT 85° C 250 HOURS
MECHANICAL
GROSS LEAK TEST
MIL-STD-883, METHOD 1014, TEST CONDITION C
FINE LEAK TEST
TERMINAL STRENGTH
MARKING INK
MIL-STD-883, METHOD 1014, TEST CONDITION A
MIL-STD-202, METHOD 211, TEST CONDITION A AND C
EPOXY, HEAT CURED.
MOISTURE RESISTANCE MIL-STD 202, METHOD 106, OMIT STEP 7B
SOLDERABILITY
MIL-STD-202, METHOD 208, 95% COVERAGE
SOLVENT RESISTANCE MIL-STD-202, METHOD 2002, METHOD 215
VCC
"1" LEVEL
1/2 VCC
"0" LEVEL
0 VDC
tf
t
T
tr
+4.5 VDC
+2.5 VDC
+0.5 VDC
PART NUMBERING SYSTEM
SERIES
CO6 (14 PIN DIP)
CO12 (8 PIN DIP)
FREQUENCY
STA BIL ITY
FREQUENCY
EXTENDED
TEMPERA TURE
S YMMETRY
OPTION S
10 0 ±1 00 PPM -
-
-
- TR TA PE A ND REEL *
05 0 ± 50 PPM
IN MHz
EXT
T TIGHT SY MMETRY GW GULL WING
02 5 ± 25 PPM
3. 3 +3 .3 V
EXAMPLE: CO6100-10.000-EXT-T, CO12050-32.000-EXT-T-TR
* Available for Gull Wing only
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: [phone] Fax: [phone] e-mail: [e-mail] Internet: http://www.raltron.com