CO15 Datasheet, PDF (1/2 Pages) Raltron Electronics Corporation – THROUGH HOLE CLOCK OSCILLATORS - 3 STATE HCMOS COMPATIBLE

THROUGH HOLE CLOCK OSCILLATORS - 3 STATE HCMOS COMPATIBLE
FEATURES
WIDE FREQUENCY RANGE
EXCELLENT FOR 16 AND 32 BIT MPU’S
3-STATE FUNCTION
SERIES CO15 AND CO19
SPECIFICATIONS
SERIES
PACKAGE
FREQUENCY RANGE
FREQUENCY STABILITY†
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
CO15
14 PIN DIP
500 KHz TO 100.00 MHz
CO15100 : ±100 PPM
CO15050 : ±50 PPM
CO15025 : ±25 PPM
0° C TO + 70° C STANDARD
-40° CTO + 85° C EXTENDED
-55° C TO +125° C
C019
8 PIN DIP
500 KHz TO 100.00 MHz
CO19100 : ±100 PPM
CO19050 : ±50 PPM
CO19025 : ±25 PPM
0° C TO + 70° C STANDARD
-40° CTO + 85° C EXTENDED
-55° C TO +125° C
INPUT
VOLTAGE
CURRENT
+5 VDC ±0.5 VDC
60 mA MAX
+5 VDC ±0.5 VDC
60 mA MAX
OUTPUT
SYMMETRY
40 TO 60% NORMAL
45 TO 55% TIGHT
40 TO 60% NORMAL
45 TO 55% TIGHT
RISE AND FALL TIME
(0.5 - 4.5 VDC)
10 ns MAX - 500 KHz TO 25.00 MHz
6ns MAX - 25.10 MHz TO 70.00 MHz
4 ns MAX - 70.1 MHz TO 100.00 MHz
10 ns MAX - 500 KHz TO 25.00 MHz
6ns MAX - 25.10 MHz TO 70.00 MHz
4 ns MAX - 70.1 MHz TO 100.00 MHz
LOGIC "0" LEVEL
+0.5 VDC MAX (10% VDD)
+0.5 VDC MAX (10% VDD)
LOGIC "1" LEVEL
+4.5 V MIN (90% VDD)
+4.5 V MIN (90% VDD)
LOAD††
1-10 TTL OR 15 pF CMOS
1-10 TTL OR 15 pF CMOS
ENABLE/DISABLE
FUNCTION
CONTROL (PIN 1)
HIGH OR OPEN
LOW
HIGH OR OPEN
LOW
OUTPUT (PIN 8 OR 5)
ENABLE : HIGH
DISABLE (LOW) : HIGH IMPEDANCE
ENABLE : HIGH
DISABLE(LOW) : HIGH IMPEDANCE
† FREQUENCY STABILITY INCLUSIVE OF ROOM TOLERANCE ,
FREQUENCY STABILITY OVER TEMPERATURE, 10% POWER SUPPLY VARIATION, AGING, SHOCK, AND VIBRATION
†† +3.3 VOLT VERSION IS AVAILABLE. CONSULT RALTRON FOR SPECIFICATIONS
††† OUTPUT LOADS ALSO AVAILABLE AT 15 pF, 30 pF AND 50 pF. CONSULT RALTRON FOR SPECIFICATIONS
ENVIRONMENTAL AND TECHNICAL CONDITIONS
OUTPUT WAVEFORM
ENVIRONMENTAL
TEMPERATURE CYCLE MIL-STD 883, METHOD 1010, 10 CYCLES -20° C TO 85° C
tf
VCC
SHOCK
MIL-STD-202, METHOD 213, TEST CONDITION C
"1" LEVEL
VIBRATION
MIL-STD-202, METHOD 204, TEST CONDITION A
RESISTANCE TO
SOLDERING HEAT
MIL-STD-202, METHOD 210, TEST CONDITION B
HUMIDITY
85% RELATIVE HUMIDITY AT 85° C 250 HOURS
MECHANICAL
GROSS LEAK TEST
MIL-STD-883, METHOD 1014, TEST CONDITION C
FINE LEAK TEST
MIL-STD-883, METHOD 1014, TEST CONDITION A
TERMINAL STRENGTH MIL-STD-202, METHOD 211, TEST CONDITION A AND C
MARKING INK
EPOXY, HEAT CURED.
MOISTURE RESISTANCE MIL-STD 202, METHOD 106, OMIT STEP 7B
1/2 VCC
"0" LEVEL
0 VDC
t
T
SOLDERABILITY
MIL-STD-202, METHOD 208, 95% COVERAGE
SOLVENT RESISTANCE MIL-STD-202, METHOD 215
tr
+4.5 VDC
+2.5 VDC
+0.5 VDC
PART NUMBERING SYSTEM
SERIES
FREQUENCY
STA BILITY
FREQUENCY
CO15 (14 PIN DIP)
100
050
±100 PPM -
±50 PPM
IN MHz
-
CO19 (8 PIN DIP) _{025 ±25 PPM}
EXAMPLE: CO15100-12.000-EXT, CO19050-45.000-T
EXTENDED
TEMPERA TURE
EXT
SY MMETRY
OPTIONS
-
- _{TR TAPE AND REEL*}
T TIGHT SYMMETRY _{GW GULL WING}
3.3 +3.3 V
* Available for Gull Wing only
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: [phone] Fax: [phone] e-mail: [e-mail] Internet: http://www.raltron.com