XTXT-HOS-8FT Datasheet, PDF (1/1 Pages) Ralston Instruments. – Quick-test XT 10,000 psi hose, S.S. hose ends, 8ft long

8
Feet
P_Xart_TNo. _XT-HOS-8ft
Quick-test XT 10,000 psi hose, S.S. hose ends, 8ft long
10,000 psi (689 bar) working pressure Microbore hoses that provide a very quick, low
volume, high pressure way of connecting to any pressure instrumentation, hand pump,
calibration source or device under test
Features
• Low volume reduces the pumping effort or compressed gas usage in pressure calibration
• No thread sealant required – connect to adapters without wrenches, thread sealant or thread tape
• Bubble tight connections to 10000 psi (689 bar) with no moving parts reduces maintenance to almost zero
• Hose is hard to break and very flexible
• Adapt from hose to virtually any device under test with only one connection
• A corrosion resistant strain-relief on each hose end reduces wear and dramatically increases hose life
• Note that these hoses are NOT compatible with QTHA adapters. Please use XTHA adapters
• Made in USA
Specifications
Length
Pressure Range
Burst Pressure
End 1
End 2
Temperature range
Outer Diameter
Inner Diameter
Minimum Bend Radius
Color
Construction
End materials
Fluid Media
8 ft
0 to 10000 psi (0 to 689 bar)
40000 psi (2,756 bar)
Female Quick-test XT, stainless steel
Female Quick-test XT, stainless steel
-40 to 140 °F (-40 to 60 °C)
0.24 in (6.1 mm)
0.08 in (2.0 mm)
1 in (25.4 mm)
Blue
Polyamide core tube, High tensile synthetic fiber and polyamide outer cover
Stainless Steel
Water, Petroleum Based Oil, Air, Inert Gas
Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone [phone] | Fax [phone]