1M1M-HOS-3FT Datasheet, PDF (1/1 Pages) Ralston Instruments. – Quick-test hose

P₁art_MNo. _1M-HOS-3ft
Quick-test hose, 1/8" NPT brass hose ends, 3 ft (92 cm) long
Hoses permit connections to Quick-test
adapters, tube fitting quick-connects or NPT
quick-connects
Features
• Low volume reduces the pumping effort or compressed gas
usage in pressure calibration
• No thread sealant required – connect adapters to without
wrenches, thread sealant or thread tape
• Bubble tight connections to 6900 psi (brass) or 11,040 psi
(stainless steel) with no moving parts
• No moving parts reduces maintenance to almost zero
• Hose is hard to break and very flexible
• Adapt from hose to virtually any device under test with only
one connection
• Silver color dramatically reduces the effect that changing
temperature has on pressure stability
• A strain-relief on each hose end reduces wear and
dramatically increases hose life
• Made in U.S.A.
Specifications
Length
Pressure Range
Burst Pressure
End 1
End 2
Temperature range
Outer Diameter
Inner Diameter
Minimum Bend Radius
Color
Construction
End materials
Fluid Media
3 ft
0 to 6900 psi (0 to 475 bar)
27000 psi (1,860 bar)
1/8" Male NPT, brass
1/8" Male NPT, brass
-40 to 140 °F (-40 to 60 °C)
0.2 in (5.1 mm)
0.08 in (2.0 mm)
1 in (25.4 mm)
Silver
Polyamide core tube, High tensile synthetic fiber and polyamide outer cover
Brass
Water, Petroleum Based Oil, Air, Inert Gas
1M1M-HOS-3ft
Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone [phone] | Fax [phone]