RA8806 Datasheet, PDF (23/174 Pages) RAIO Technology Inc. – Two Layers Character/Graphic LCD Controller Specification

Preliminary Version 1.0
RA8806
Two Layers Character/Graphic LCD Controller
REG [C3h] Touch Panel Segment/Common Low Byte Data Register (TPZR)
Bit
Description
7-4 ^Reserved
3-2 ^{Touch Panel Y Data Bit[1:0] (Common)}
1-0 ^{Touch Panel X Data Bit[1:0] (Segment)}
Default
0000
00
00
Access
R
R
R
REG [C4h] Touch Panel Control Register 2 (TPCR2)
Bit
Description
TP Manual Mode Enable
7 1 : Using the manual mode.
0 : Auto mode.
6-2 ^Reserved
Mode selection for TP Manual Mode
00 : IDLE mode: ADC idles.
01 : Wait for TP event, touch panel event could cause the interrupt or
1-0
be read from REG[0Fh] B3.
10 : Latch X data, in the phase, X Data can be latched in REG[C1h]
and REG[C3h].
11 : Latch Y data, in the phase, Y Data can be latched in REG[C2h]
and REG[C3h].
Default
0
00h
00
Access
R/W
R
R/W
REG [D0h] PWM Control Register (PCR)
Bit
Description
PWM enable
7 1 : Enable
0 : Disable, PWM_OUT level depends on the REG[D0h] Bit-6.
PWM Disable Level
6 0 : PWM_OUT is Normal L when PWM disable or Sleep mode.
1 : PWM_OUT is Normal H when PWM disable or Sleep mode.
5-4 ^Reserved
PWM Clock Source Divide Ratio
0000 b Æ CLK / 1
0001 b Æ CLK / 2
0010 b Æ CLK / 4
0011 b Æ CLK / 8
:
:
3-0 1111 b Æ CLK / 32768
The “CLK” means system clock. For example, CLK is 8MHz:
0000 b Î PWM clock source = 8MHz,
0001 b Î PWM clock source = 4MHz,
:
:
1111 b Î PWM clock source = 256Hz.
Default Access
0
R/W
0
R/W
00
R
0000
R/W
RAiO TECHNOLOGY INC.
23/174
www.raio.com.tw