QPT1 Datasheet, PDF (1/8 Pages) Radiometrix Ltd – VHF Narrow Band FM 2 Watt multi channel

Hartcran House, 231 Kenton Lane, Harrow, Middlesex, HA3 8RP, England
Tel: [phone], Fax: [phone], www.radiometrix.com
QPT1
Issue 1, 31 July 2012
VHF Narrow Band FM 2 Watt multi channel
The QPT1 transmitter module offers a 2 watt
RF output VHF radio link, in either a robust
aluminium extruded casing, or a smaller
footprint PCB mounted shield can. This unit
is ideally suited to applications where
existing lower powered transmitters provide
insufficient range. The QPT1 transmitter is a
multi-channel, narrowband design, suitable
for licensed and unlicensed VHF allocations,
FCC part 90 operation, and the 2M amateur
band. Together with a matching LMR1 or
RX1M receiver a one-way radio data link can
be achieved over a distance of well over
10km (with a suitable antenna)."
Features
Compliant with FCC part 90
PLL synthesizer with TCXO
Data rates up to 5 kbps for standard module
Usable range over 10km
Re-programmable via RS232 interface
Figure 1: QPT1-173-5-12k5-FCC-EAS
Applications
Amateur radio
MURS units
Industrial telemetry and telecommand
High-end security systems
APRS systems
Vehicle data up/download
ROV/machinery controls
Technical Summary
Operating frequency: 144.000 - 144.775 (25KHz steps)
Any 2MHz segment in 135 - 175MHz
16 channels selected by parallel interface
or 32 channels by serial command
Transmit power: 2 W (+33dBm) nominal (1 watt version available)
Supply range: 12V (11 – 15V)
Current consumption: 550mA typ.
Data bit rate: 5kbps max
Size: 68 x 55 x 15mm (pcb mounted version)
83 x 64 x 30 mm (extrusion case version)
(dimensions do not include connectors)
Radiometrix Ltd
QPT1 Data Sheet
page 1