|
LMT2 Datasheet, PDF (1/11 Pages) List of Unclassifed Manufacturers – UHF Narrow Band FM Low Cost multi channel radio modules | |||
|
NEW
Radiometrix
Hartcran House, 231 Kenton Lane, Harrow, HA3 8RP, England
Issue 2, 01 November 2007 Tel: +44 (0) 20 8909 9595, Fax: +44 (0) 20 8909 2233
LMT2/LMR2
UHF Narrow Band FM Low Cost multi channel radio modules
The LMT2 transmitter and LMR2
receiver modules offer a multi channel,
low power, and reliable data link. This
makes the LMT2/LMR2 pair ideally
suited to those low power applications
where existing wideband modules have
insufficient range, or where low cost
multi-channel operation is needed
without compromising on RF
specification or regulatory requirement.
Figure 1: LMT2 transmitter and LMR2 receiver
Features
⢠Conforms to EN 300 220-3 and EN 301 489-3
⢠High performance double superhet. PLL synthesizer with TCXO
⢠quasi-dc (peak sampling) data recovery circuit (for enhanced performance on unbalanced
datastreams)
⢠SAW front-end filter
⢠Data rates up to 5 kbps for standard module
⢠Usable range over 1km
⢠Fully screened. Low profile
⢠Feature-rich interface (RSSI, analogue and digital baseband)
⢠Re-programmable via RS232 interface
⢠Low power requirements
Applications
⢠Handheld terminals
⢠EPOS equipment, barcode scanners
⢠Data loggers
⢠Industrial telemetry and telecommand
⢠In-building environmental monitoring and control
⢠High-end security and fire alarms
⢠DGPS systems
⢠Vehicle data up/download
⢠Heavy vehicle/machinery controls
Technical Summary
⢠Operating frequency: 433.875-434.650MHz (EU band)
458.525 - 459.1MHz (UK band)
⢠Other custom UHF bands
⢠32 channels
⢠Transmit power: +10dBm (10mW) / +20dBm (100mW)
⢠Supply range: 3.1 â 15V (TX @ 10mW and RX), 4.1 â 15V (TX @ 100mW)
⢠Current consumption: 34mA @ 10mW, 90mA @ 100mW (transmit) and 20mA (receive)
⢠Data bit rate: 5kbps max. (standard module)
⢠Receiver sensitivity: -118dBm (for 12 dB SINAD)
⢠Serial configuration by inverted RS232 at 3V CMOS level
Radiometrix Ltd
LMT2/LMR2 Data Sheet
page 1
|
▷ |