|
ENT1 Datasheet, PDF (1/11 Pages) Radiometrix Ltd – 12.5kHz Channel VHF High Power TX | |||
|
NEW
Radiometrix
Hartcran House, 231 Kenton Lane, Harrow, HA3 8RP, England
Issue 1, 16 October 2007
Tel: +44 (0) 20 8909 9595, Fax: +44 (0) 20 8909 2233
ENT1
12.5kHz Channel VHF High Power TX
The ENT1 transmitter modules offer a
100mW RF output VHF data link in
Radiometrix SIL standard pin-out and
footprint. This makes the ENT1 ideally
suited to those low power applications
where existing narrow band and
wideband transmitters provide
insufficient range. Together with the
matching LMR1/RX1M receiver a one-
way radio data link can be achieved
over a distance up to 10km+ with
suitable choice of data rate and
antennas.
Figure 1: ENTI â169.40625-3
Features
⢠Conforms to EN 300 220-3 and EN 301 489-3
⢠Standard frequency 169.406250MHz
⢠Other frequencies from 120MHz to 180MHz
⢠12.5 kHz channel spacing
⢠Data rates up to 3kbps
⢠Usable range over 10km
⢠Fully screened
⢠Low power requirements
Applications
⢠Remote meter reading
⢠Data loggers
⢠Industrial telemetry and telecommand
⢠In-building environmental monitoring and control
⢠High-end security and fire alarms
⢠DGPS systems
⢠Vehicle data up/download
Technical Summary
⢠Size: 43 x 14.5 x 5mm
⢠Operating frequency: 169.406250MHz
⢠Supply range: 5v
⢠Current consumption: 70mA Max
⢠Data bit rate: 3kbps max.
⢠Transmit power: 20dBm (100mW) nominal
Radiometrix Ltd.,
ENT1 high power transmitter data sheet
Page 1
|
▷ |