OCO-M50BS12-05 Datasheet, PDF (1/4 Pages) QUARTZCOM the communications company – Low Noise OCXO Sine wave

OCO-M50BS12-05
Low Noise OCXO
Sine wave
Application:
Base station
Nominal frequency
Frequency stability
vs. operating temperature range
vs. supply change
vs. load change
vs. aging after 30 days of operation
Short term stability (Allan deviation)
Frequency tolerance ex. factory
Supply voltage
Output signal
Load
Peak current consumption
Steady-state current consumption
Warm up time @ +25 °C
Frequency pulling range (Vin)
Vcontrol (Vc) via external voltage
Reference voltage output (Vref)
Harmonics
Phase noise @ 10 MHz
Operating temperature range
Storage temperature range
10.0000 MHz
≤ ±5 x 10^-10
≤ ±5 x 10^-10
≤ ±5 x 10^-10
≤ ±2 x 10^-8
< 5 x 10^-13
≤ ±1 x 10^-7
+12.0 V
Sine
50 Ω
< 550 mA
< 250 mA
< 3 min
> ±4 x 10^-7
0 ~ +5.0 V
+4.5 V
> 30 dBc
< -95 dBc/Hz
< -125 dBc/Hz
< -145 dBc/Hz
<-150 dBc/Hz
<-155 dBc/Hz
-40 ~ +85 °C
-55 ~ +85 °C
over -40 ~ +85 °C
±5 %
±5 %
1^st year
per second
@ +25 °C
±5 %
> 3 dBm
±5 %
after switch on
@ +25 °C
< ±2 x 10^-8
positive slope
@
10 Hz
@
10 Hz
@ 100 Hz
@
1 kHz
@ 10 kHz
Environmental test
vibration
shock
acceleration: 5 g; 10 Hz up to 200 Hz and down to 10 Hz; all 3 axes
75 g, half-sine, 3 ms
Pin function
1 # Vc
Supply voltage
2 # Vref Reference output
3 # RF
Output signal
4 # GND Case Ground
5 # Vdc +5 V supply
Connection Circuit
Case height H = 12.7 mm
Zout = 50 Ω
QuartzCom AG
[e-mail]
www.quartzcom.com
2002/95/EC RoHS compliant
QuartzCom Asia
[e-mail]
QuartzCom USA
[e-mail]
Page 1 of 4 05 Aug. 11