QPSF-125 Datasheet, PDF (1/2 Pages) Qualtek Electronics Corporation – 125Watts Single Output

125Watts Single Output
Qualtek
Electronics Corporation
P
P C _{QPSF-125 Series}
Features:
Universal AC input/ Full range
Built-in active PFC function, PF>0.93
High Efficiency, and High Reliability
Wide Operating Ambient Temperature (-20°C~60°C)
Output Protections: OLP/OVP/SCP
All using 105°C long life electrolytic capacitors.
100% full load burn-in test
CB
Model
QPSF-125-5 QPSF-125-12 QPSF-125-15 QPSF-125-24 QPSF-125-28 QPSF-125-48
Output Characteristics
DC Output
Rated Current
Current Range
Ripple and Noise
Voltage ADJ. Range
Voltage Accuracy
Line Regulation
Load Regulation
Set-up Time
Hold-up Time
Temperature Coefficient
Overshoot and Undershoot
5V
12V
15V
24V
28V
20A
10.5A
8.4A
5.2A
4.5A
0~20A
0~10.5A
0~8.4A
0~5.2A
0~4.5A
100mV
100mV
100mV
100mV
120mV
±10% of rated output voltage
±2.0%
±2.0%
±2.0%
±2.0%
±2.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±2.0%
±2.0%
±2.0%
±2.0%
±2.0%
<2500ms (115VAC input, full load); <1200ms (230VAC input, full load)
>17ms (115VAC input, full load); >17ms (230VAC input, full load)
±0.03%/°C
<5.0%
48V
2.6A
0~0.42A
150mV
±2.0%
±0.5%
±2.0%
Input Characteristics
Voltage Range
90VAC~264VAC
Frequency Range
47Hz-63Hz
Power Factor (Typical)
PF>0.98/115VAC PF>0.93/230VAC
Efficiency
115VAC Input ^82%
85%
85%
85%
(Typical)
230VAC Input ^84%
87%
87%
87%
AC Current (max)
1.5A
1.5A
1.5A
1.5A
Inrush Current (Typical)
30A@115VAC Cold start 60A@230VAC Cold start
Leakage Current
<3.5mA
85%
86%
87%
88%
1.5A
1.5A
Protection
Over Load (OLP)
105%~150% of rated output current, hiccup mode, auto recover
Over Voltage (OVP)
120%~150% of rated output voltage, hiccup mode
Short Circuit (SCP)
Long-term mode, auto recovery
Environmental Characteristics
Operating Amb. Temp. & Hum -20°C~60°C; 20%~90% RH Non-Condensing
Storage Temp. & Hum
-40°C~85°C: 10%-95% RH Non-Condensing
Safety Standards
GB4943-2001; EN60950-1: 2006
Withstand Voltage
Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA
Isolation Resistance
≥100M ohms
EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B
Harmonic Current
Compliance to EN61000-3-2,-3
EMS Immunity
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A
General Characteristics
MTBF (MIL-HDBK-217F)
Dimension (LxWxH)
Packing
Connection
Cooling Method
More than 100,000Hrs (25°C, Full load)
127x76x30.5mm
21PCS/CTN. G.W: 8.46kgs
7P/8.025MM barrier terminal block
Cooling by free air convection
Page 1 of 2