QPDF-100 Datasheet, PDF (1/2 Pages) Qualtek Electronics Corporation – 100Watts Single Output

100Watts Single Output
Qualtek
Electronics Corporation
P
P C _{QPDF-100 Series}
Features:
Universal AC input/ Full range
Built-in active PFC function, PF>0.95
High Efficiency, and High Reliability
Output Protections: OLP/OVP/SCP
All using 105°C long life electrolytic capacitors.
100% full load burn-in test
CB
Model
QPDF-100-5 QPDF-100-12 QPDF-100-15 QPDF-100-24 QPDF-100-36 QPDF-100-48
Output Characteristics
DC Output
5V
12V
15V
24V
36V
48V
Rated Current
20A
8.5A
6.7A
4.2A
2.75A
2.10A
Current Range
0~20A
0~8.5A
0~6.7A
0~4.2A
0~2.75A
0~2.10A
Ripple and 0~60°C
Noise
-10~0°C
Voltage ADJ. Range
Voltage Accuracy
Line Regulation
Load Regulation
Set-up Time
<50mV
<100mV
<100mV
<100mV
<100mV
<100mV
<100mV
<100mV
4.5V~5.5V 10.6V~13.6V 13.5V~17.0V 21.8V~27.4V
±2.0%
±2.0%
±2.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±1.0%
±1.0%
±1.0%
±1.0%
<4.0s (115VAC input, full load); <2.0s (230VAC input, full load)
<100mV
<100mV
32.6V~39.9V
±1.0%
±0.5%
±1.0%
<100mV
<100mV
44V~52V
±1.0%
±0.5%
±1.0%
Hold-up Time
>10ms (115VAC input, full load); >20ms (230VAC input, full load)
Temperature Coefficient
±0.03%/°C
Overshoot and Undershoot
<5.0%
Input Characteristics
Voltage Range
Frequency Range
90VAC~264VAC, 127VDC~370VDC
47Hz-63Hz
Power Factor (Typical)
PF>0.98/115VAC PF>0.95/230VAC
Efficiency
115VAC Input 78%
84%
84%
84%
84%
86%
(Typical)
230VAC Input 80%
86%
86%
86%
86%
87%
AC Current (max)
<1.7A
Inrush Current (Typical)
30A@115VAC Cold start, 50A@230VAC Cold start
Leakage Current
Input-Output: <0.25mA Input-PG: <3.5mA
Protection
Over Load (OLP)
105%~150% of rated output current, hiccup mode, auto recovery
Over Voltage (OVP)
110%~150% of rated output voltage, shut down, re-power on to recover
Short Circuit (SCP)
Long-term mode, auto recovery
Environmental Characteristics
Operating Amb. Temp. & Hum
Storage Temp. & Hum
Safety Standards
Withstand Voltage
-10°C~60°C; 20%~90% RH Non-Condensing
-20°C~85°C: 10%-95% RH Non-Condensing
UL60950-1; EN60950-1: 2006
Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA
Isolation Resistance
≥100M ohms
EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B
Harmonic Current
Compliance to EN61000-3-2, 17625.1-2003
EMS Immunity
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A
General Characteristics
MTBF (MIL-HDBK-217F)
Dimension (LxWxH)
Packing
Cooling Method
More than 200,000Hrs (25°C, Full load)
194x99x50mm
10PCS/CTN. G.W: 8.1kgs
Cooling by free air convection
Rev. B
Page 1 of 2