QPD-35 Datasheet, PDF (1/2 Pages) Qualtek Electronics Corporation – 35Watts Single Output

35Watts Single Output
Qualtek
Electronics Corporation
P
P C _{QPD-35 Series}
Features:
Universal AC input/ Full range
No Load Power Consumption <0.5W
Wide Operating Ambient Temperature (-25°C~70°C)
Operating Altitude up to 5000M
High Efficiency, and High Reliability
Output Protections: OLP/OVP/SCP
All using 105°C long life electrolytic capacitors.
100% full load burn-in test
Withstand 300VA Surge Input for 5 Sec
PCB soldering side with conformal coating
CB
Model
QPD-35-5
QPD-35-12
QPD-35-15
QPD-35-24
QPD-35-48
Output Characteristics
DC Output
5V
12V
15V
24V
48V
Rated Current
6A
3A
2.4A
1.5A
0.76A
Current Range
0~6A
0~3A
0~2.4A
0~1.5A
0~0.76A
Ripple and 0~70°C
50mV
80mV
120mV
120mV
180mV
Noise
-25~0°C
80mV
180mV
200mV
200mV
240mV
Voltage ADJ. Range
4.75V~5.5V
11.4V~13.2V
14.3V~16.5V
22.8V~26.4V
45.6V~52.8V
Voltage Accuracy
±3.0%
±3.0%
±3.0%
±3.0%
±3.0%
Line Regulation
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
Load Regulation
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
Set-up Time
<1.0s (230VAC input, full load)
Hold-up Time
>10ms (115VAC input, full load); >20ms (230VAC input, full load)
Temperature Coefficient
±0.03%/°C
Overshoot and Undershoot
<5.0%
Input Characteristics
Voltage Range
90VAC~264VAC, 127VDC~370VDC
Frequency Range
47Hz-63Hz
Efficiency
115VAC Input 79%
83%
85%
86%
87%
(Typical)
230VAC Input 80%
84%
86%
87%
88%
AC Current (max)
<1.0A
Inrush Current (Typical)
<50A@230VAC Cold start
Leakage Current
Input-Output: <3.5mA Input-PG: <0.25mA
Protection
Over Load (OLP)
105%~150% of rated output current, constant power, auto recovery
Over Voltage (OVP)
105%~150% of rated output voltage, constant voltage
Short Circuit (SCP)
Long-term mode, auto recovery
Environmental Characteristics
Operating Amb. Temp. & Hum -25°C~70°C; 20%~90% RH Non-Condensing
Storage Temp. & Hum
-40°C~85°C; 10%-95% RH Non-Condensing
Safety Standards
UL60950-1; EN60950-1: 2006
Withstand Voltage
Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA
Isolation Resistance
≥100M ohms
EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B
Harmonic Current
Compliance to EN61000-3-2,-3
EMS Immunity
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A
General Characteristics
MTBF (MIL-HDBK-217F)
More than 200,000Hrs (25°C, Full load)
Dimension (LxWxH)
101.6x63.5x33mm
Packing
60PCS/CTN. G.W: 15.08kgs
Cooling Method
Cooling by free air convection
Page 1 of 2