English
Language : 

QPD-150 Datasheet, PDF (1/2 Pages) Qualtek Electronics Corporation – 150Watts Single Output
150Watts Single Output
Qualtek
Electronics Corporation
P
P C QPD-150 Series
Features:
AC input selectable by switch (115VAC/230VAC)
Wide Operating Ambient Temperature (-20°C~70°C)
High Efficiency, and High Reliability
Output Protections: OLP/OVP/SCP
All using 105°C long life electrolytic capacitors.
100% full load burn-in test
Model
QPD-150-5
QPD-150-12 QPD-150-15 QPD-150-24
QPD-150-48
Output Characteristics
DC Output
Rated Current
Current Range
Ripple and 0~70°C
Noise
-20~0°C
Voltage ADJ. Range
Voltage Accuracy
Line Regulation
Load Regulation
Set-up Time
Hold-up Time
Temperature Coefficient
Overshoot and Undershoot
5V
12V
15V
24V
26A
12.5A
10A
6.5A
0~26A
0~12.5A
0~10A
0~6.5A
80mV
120mV
120mV
120mV
100mV
150mV
180mV
150mV
4.2V-6.0V
10.0V-14.0V
13.0V-17.0V
21.0V-28.0V
±2.0%
±1.0%
±1.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±1.0%
±1.0%
±1.0%
±1.0%
<2.0s (115VAC input, full load); <1.0s (230VAC input, full load)
>10ms (115VAC input, full load); >20ms (230VAC input, full load)
±0.03%/°C
<5.0%
48V
3.3A
0~3.3A
200mV
300mV
43.0V-54.0V
±1.0%
±0.5%
±1.0%
Input Characteristics
Voltage Range
88VAC/176VAC~132VAC/264VAC
Frequency Range
47Hz-63Hz
Efficiency
115VAC Input 78%
83%
83%
84%
85%
(Typical)
230VAC Input 79%
83%
84%
85%
86%
AC Current (max)
≤3.5A/2.0A
Inrush Current (Typical)
20A@115VAC Cold start 40A@230VAC Cold start
Leakage Current
<0.25mA/115VAC <2.0mA/230VAC
Protection
Over Load (OLP)
105%~150% of rated output current, hiccup mode, auto recovery
Over Voltage (OVP)
120%~150% of rated output voltage, shut down, re-power on to recover
Short Circuit (SCP)
Long-term mode, auto recovery
Environmental Characteristics
Operating Amb. Temp. & Hum -20°C~70°C; 20%~90% RH Non-Condensing
Storage Temp. & Hum
-40°C~85°C: 10%-95% RH Non-Condensing
Safety Standards
UL60950-1; EN60950-1: 2006
Withstand Voltage
Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA
Isolation Resistance
≥100M ohms
EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B
Harmonic Current
Compliance to EN61000-3-2,-3
EMS Immunity
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A
General Characteristics
MTBF (MIL-HDBK-217F)
Dimension (LxWxH)
Packing
Cooling Method
More than 100,000Hrs (25°C, Full load)
199x98x38mm
20PCS/CTN. G.W: 15.0kgs
Cooling by free air convection
Page 1 of 2