QPD-100 Datasheet, PDF (1/2 Pages) Qualtek Electronics Corporation – 100Watts Single Output

100Watts Single Output
Qualtek
Electronics Corporation
P
P C _{QPD-100 Series}
Features:
Universal AC input/ Full range
Wide Operating Ambient Temperature (-20°C~70°C)
High Efficiency, and High Reliability
Output Protections: OLP/OVP/SCP
All using 105°C long life electrolytic capacitors.
100% full load burn-in test
Model
QPD-100-5
QPD-100-12 QPD-100-15 QPD-100-24
QPD-100-48
Output Characteristics
DC Output
Rated Current
Current Range
Ripple and 0~70°C
Noise
-20~0°C
Voltage ADJ. Range
Voltage Accuracy
Line Regulation
Load Regulation
Set-up Time
Hold-up Time
Temperature Coefficient
Overshoot and Undershoot
5V
12V
15V
24V
16A
8.5A
7A
4.5A
0~16A
0~8.5A
0~7A
0~4.5A
<80mV
<100mV
<100mV
<120mV
<100mV
<120mV
<120mV
<120mV
4.7V-5.6V
11.0V-13.0V
13.7V-16.3V
22.4V-27.3V
±2.0%
±1.0%
±1.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±1.0%
±1.0%
±1.0%
±1.0%
<2.0s (115VAC input, full load); <1.0s (230VAC input, full load)
>10ms (115VAC input, full load); >20ms (230VAC input, full load)
±0.03%/°C
<5.0%
48V
2.3A
0~2.3A
<200mV
<200mV
44.4V-52.2V
±1.0%
±0.5%
±1.0%
Input Characteristics
Voltage Range
90VAC~264VAC, 127VDC~370VDC
Frequency Range
47Hz-63Hz
Efficiency
115VAC Input 80%
80%
83%
85%
83%
(Typical)
230VAC Input 80%
81%
84%
85%
84%
AC Current (max)
<2.5A
Inrush Current (Typical)
20A@115VAC Cold start 40A@230VAC Cold start
Leakage Current
<0.4mA@115VAC <0.75mA@230VAC
Protection
Over Load (OLP)
105%~150% of rated output current, hiccup mode, auto recovery
Over Voltage (OVP)
110%~150% of rated output voltage, shut down, re-power on to recover
Short Circuit (SCP)
Long-term mode, auto recovery
Environmental Characteristics
Operating Amb. Temp. & Hum
Storage Temp. & Hum
Safety Standards
Withstand Voltage
Isolation Resistance
EMI Conduction & Radiation
Harmonic Current
EMS Immunity
-20°C~70°C; 20%~90% RH Non-Condensing
-40°C~85°C: 10%-95% RH Non-Condensing
UL60950-1; EN60950-1: 2006
Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA
≥100M ohms
Compliance to EN55022(CISPR22) Class B
Compliance to EN61000-3-2, 3
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A
General Characteristics
MTBF (MIL-HDBK-217F)
Dimension (LxWxH)
Packing
Cooling Method
More than 200,000Hrs (25°C, Full load)
160x98x38mm
20PCS/CTN. G.W: 13.6kgs
Cooling by free air convection
Rev.B
Page 1 of 2