Q-200E_13 Datasheet, PDF (1/1 Pages) Qualtek Electronics Corporation – HEAT SHRINK THIN WALL TUBING

HEAT SHRINK THIN WALL TUBING
Q-200E
200°C, VERY FLEXIBLE
MODIFIED FLUOROELASTOMER TUBING (Viton® )
SHRINK RATIO 2:1
Features/Applications
cut-through resistance. Used for applications requiring high resistance to corrosive
at high and low temperatures without cracking.
Operating temperature: -55°C to +200°C
Minimum shrink temperature: 150°C
Full recovery temperature: 175°C
Approval: UL VW-1, File No. E245010
Meets: SAE-AMS-DTL-23053/13
Standard Color: Black
RoHS Compliant
Technical Data
Property
Operating Temperature
Tensile Strength
Elongation at Break
Elongation at Break After Aging
Heat Shock
Flexibility
Dielectric Strength
Volume Resistance
Copper Corrosion
Flammability
Test Method
IEC 216
ASTM D 2671
ASTM D 2671
250°C, 168 hrs.
300°C, 4 hrs.
ASTM D 412
ASTM D 2671
ASTM D 876
UL 224
ASTM D 2671
Typical Data
-55°C to +200°C
> 8.5 MPa
> 250%
> 8MPa
> 200%
No cracking or dropping
< 13.8 MPa
> 7.9kV / mm
> 10¹⁴ Ω.cm
No corrosion
Self-extinguish in 15 sec.
Product Dimensions
Size
As Supplied
(mm)
Inch
mm
Inside
Diameter
(min.)
After Recovered
(mm)
Inside
Wall
Diameter Thickness
(max.)
(min.)
Tubing
Shape
1/8
3.2
3.2
1.6
0.76
3/16
4.8
4.8
2.4
0.90
1/4
6.4
6.4
3.2
0.90
3/8
9.5
9.5
4.8
0.90
1/2
12.7
12.7
6.4
1.10
3/4
19.1
19.1
9.5
1.30
1
25.4
25.4
12.7
1.65
1 1/2
38.1
38.1
19.1
1.90
2
50.8
50.8
25.4
2.80
Notes:
1. * See page 13 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Viton® is a registered trademark of E.I. Du Pont de Nemours and Co. Inc.
Round
Round
Round
Round
Round
Round
Flat
Flat
Flat
Standard
Spool
*(SS)
(Meter)
50
50
50
50
30
30
30
15
15
Standard
Packaging
Cut to Length Pcs.
*(QB)
Qty per bag
6”
48”
20
25
16
25
12
25
8
25
4
5
2
5
1
5
1
5
1
5
www.Qualtekusa.com