882-06013 Datasheet, PDF (1/1 Pages) Qualtek Electronics Corporation – Qualtek Electronics Corp

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK
ELECTRONICS AND NOT TO BE REPRODUCED FOR
OR COMMUNICATED TO A THIRD PARTY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER
OF QUALTEK ELECTRONICS.
1. PHYSICAL DIMENSIONS
32.0 ± 0.5
28.0 ± 0.5
46.0 ± 0.5
41.0 ± 0.5
51.3 ± 1.0
28.5
±
0.2
0
R2.0MAX (4X)
REVISION
REV.
DESCRIPTION
B
RoHS Compliancy
C
Updated Temp Rating, Insertion Loss, and Notes
DATE
06-01-06
07-28-16
APPROVED
DP
LY
ELECTRICAL CHARACTERISTICS:
1-1. VOLTAGE RATING...................................115/250VAC
1-2. CURRENT RATING
A. @ 115 VAC..........................................6 A RMS MAX
B. @ 250 VAC.........................................6 A RMS MAX
1-3. OPERATING FREQUENCY......................50/60Hz
1-4. LEAKAGE CURRENT: EACH LINE TO GROUND
A. @ 115 VAC 60Hz............................0.20 mA MAX
B. @ 250 VAC 50Hz.............................0.40 mA MAX
1-5. HIPOT RATING (FOR ONE MINUTE)
A. LINE TO GROUND...........................2250 VDC
B. LINE TO LINE.....................................1450 VDC
1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM)
FREQ. MHz
COM. MODE dB
DIF. MODE dB
.01 .05 .10 .15 .50 1.0 5.0 10 30
/ 6 10 12 18 24 35 40 40
/ 1 2 4 10 15 35 40 40
27.9 ± 0.5
2. ELECTRICAL SCHEMATIC
L ACCORDING TO PANEL THICKNESS
0.8~2.0mm L=55.9
2.1~3.2mm L=56.2
1-7. OPERATING TEMPERATURE.................-25° TO +100° C
(DERATING ABOVE 40˚C)
1-8. SAFETY:
1-9. FUSE SIZE: 5x20mm (FUSES NOT INCLUDED)
PANEL CUTOUT
(MOUNTING FROM FRONT)
L: 1.05mH
Cx: 0.1uF
Cy: 2200pF
R: 1.0MΩ
Dim
range
(mm)
0-1
1-6
6-18
18-50
50-120
120-250
250-500
1-10. RoHS COMPLIANT
CONTROLLED
Tolerance
+/-
Qualtek Electronics Corp.
PPC DIVISION
(mm) ^{Part Number:} _882-06/013
0.15
Description:
EMI FILTER
0.20
0.30
0.50
UNIT: mm
0.70
Drawn / Date
Checked / Date
0.90
B.ZHANG
1.20
10-31-02
10-31-02
REV. C
Approved / Date
JJH / 10-31-02