882-06-011 Datasheet, PDF (1/1 Pages) Qualtek Electronics Corporation – EMI FILTER

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK
ELECTRONICS AND NOT TO BE REPRODUCED FOR
OR COMMUNICATED TO A THIRD PARTY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER
OF QUALTEK ELECTRONICS.
1. PHYSICAL DIMENSIONS
32.0
28.0
4
46.0
LABEL
41.0
51.3
28.5
±
0.2
0
R2
28.4MAX
2. ELECTRICAL SCHEMATIC
PANEL CUTOUT
(MOUNTING FROM FRONT)
L ACCORDING TO PANEL THICKNESS
0.8~2.0mm L=55.9
2.1~3.2mm L=56.2
L: 1.05mH
Cx: 0.1uF
Cy: 2200pF
R: 1.0MΩ
REVISION
REV.
DESCRIPTION
B
RoHS Compliancy
DATE
06-01-06
APPROVED
DP
ELECTRICAL CHARACTERISTICS:
1-1. VOLTAGE RATING...................................115/250VAC
1-2. CURRENT RATING
A. @ 115 VAC..........................................6 A RMS MAX
B. @ 250 VAC.........................................6 A RMS MAX
1-3. OPERATING FREQUENCY......................50/60Hz
1-4. LEAKAGE CURRENT: EACH LINE TO GROUND
A. @ 115 VAC 60Hz............................0.20 mA MAX
B. @ 250 VAC 50Hz.............................0.40 mA MAX
1-5. HIPOT RATING (FOR ONE MINUTE)
A. LINE TO GROUND...........................2250 VDC
B. LINE TO LINE.....................................1450 VDC
1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM)
FREQ. MHz
COM. MODE dB
DIF. MODE dB
.01 .05 .10 .15 .50 1.0 5.0 10 30
/ / / 12 18 24 35 40 40
/ / / 4 10 15 35 40 40
1-7. OPERATING TEMPERATURE.................-25° TO +85° C
1-8. SAFETY:
1-9. RoHS COMPLIANT
Dim
range
(mm)
0-1
1-6
6-18
18-50
50-120
120-250
250-500
Tolerance
+/-
(mm)
0.15
0.20
0.30
0.50
0.70
0.90
1.20
CONTROLLED
Qualtek Electronics Corp.
PPC DIVISION
Part Number: _882-06/011
Description:
EMI FILTER
Drawn / Date
B.ZHANG
02-07-03
UNIT: mm
Checked / Date
02-07-03
REV. B
Approved / Date
JJH / 02-07-03