880-01004 Datasheet, PDF (1/1 Pages) Qualtek Electronics Corporation – EMI FILTER

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK
ELECTRONICS AND NOT TO BE REPRODUCED FOR
OR COMMUNICATED TO A THIRD PARTY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER
OF QUALTEK ELECTRONICS.
1. PHYSICAL DIMENSIONS
65.7REF.
R2.5MAX.
Ø3.3 ± 0.2
M3
60.0 ± 1.0
59.5MAX.
2. ELECTRICAL SCHEMATIC
L: 7.5mH
C1: 0.22uF
C2: 2200pF
R: 1.0MΩ
REVISION
REV.
DESCRIPTION
B
RoHS Compliancy
DATE
06-01-06
APPROVED
DP
ELECTRICAL CHARACTERISTICS:
1-1. VOLTAGE RATING...................................115/250VAC
1-2. CURRENT RATING
A. @ 115 VAC..........................................1 A RMS MAX
B. @ 250 VAC.........................................1 A RMS MAX
1-3. OPERATING FREQUENCY......................50/60Hz
1-4. LEAKAGE CURRENT: EACH LINE TO GROUND
A. @ 115 VAC 60Hz............................0.20 mA MAX
B. @ 250 VAC 50Hz.............................0.40 mA MAX
1-5. HIPOT RATING (FOR ONE MINUTE)
A. LINE TO GROUND...........................2250 VDC
B. LINE TO LINE.....................................1450 VDC
1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM)
FREQ. MHz
COM. MODE dB
DIF. MODE dB
.01 .05 .10 .15 .50 1.0 5.0 10 30
10 20 25 28 40 40 35 35 35
/ 2 8 10 20 28 35 38 35
Dim
range
(mm)
0-1
1-6
6-18
18-50
50-120
120-250
250-500
1-7. OPERATING TEMPERATURE.................-25° TO +85° C
1-8. SAFETY:
1-9. USE 5X20mm FUSE
1-10. RoHS COMPLIANT
CONTROLLED
Tolerance
+/-
Qualtek Electronics Corp.
PPC DIVISION
(mm) ^{Part Number:} _880-01/004
0.15
Description:
EMI FILTER
0.20
0.30
0.50
UNIT: mm
0.70
Drawn / Date
Checked / Date
0.90
B.ZHANG
1.20
03-18-04
03-18-04
REV. B
Approved / Date
JJH / 03-18-04