858-10015 Datasheet, PDF (1/1 Pages) Qualtek Electronics Corporation – EMI FILTER

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK
ELECTRONICS AND NOT TO BE REPRODUCED FOR
OR COMMUNICATED TO A THIRD PARTY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER
OF QUALTEK ELECTRONICS.
1. PHYSICAL DIMENSIONS
Ø3.3(2X)
54.0MAX
50.0MAX
39.5MAX
40.0 ± 0.13
28.45
±
0.5
0
M3(2X)
R3.0(4X)
PANEL CUTOUT
(MOUNTING FROM FRONT)
2. ELECTRICAL SCHEMATIC
L: 0.2mH
C1: 0.1uF
C2: 2200pF
REVISION
REV.
DESCRIPTION
B
RoHS Compliancy
C
Updated Specifications
DATE
06-01-06
10-13-08
APPROVED
DP
LY
ELECTRICAL CHARACTERISTICS:
1-1. VOLTAGE RATING...................................115/250VAC
1-2. CURRENT RATING
A. @ 115 VAC..........................................10 A RMS MAX
B. @ 250 VAC.........................................10 A RMS MAX
1-3. OPERATING FREQUENCY......................50/60Hz
1-4. LEAKAGE CURRENT: EACH LINE TO GROUND
A. @ 115 VAC 60Hz............................0.20 mA MAX
B. @ 250 VAC 50Hz.............................0.40 mA MAX
1-5. HIPOT RATING (FOR ONE MINUTE)
A. LINE TO GROUND...........................2250 VDC
B. LINE TO LINE.....................................1450 VDC
1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM)
FREQ. MHz
COM. MODE dB
DIF. MODE dB
.01 .05 .10 .15 .50 1.0 5.0 10 30
/ 1 2 4 10 13 28 35 40
/ 1 2 4 10 15 25 30 40
Dim
range
(mm)
0-1
1-6
6-18
18-50
50-120
120-250
250-500
1-7. OPERATING TEMPERATURE.................-25° TO +100° C
1-8. SAFETY:
1-9. RoHS COMPLIANT
Tolerance
+/-
(mm)
0.15
0.20
0.30
0.50
0.70
0.90
1.20
CONTROLLED
Qualtek Electronics Corp.
PPC DIVISION
Part Number: _858-10/015
Description:
EMI FILTER
Drawn / Date
B.ZHANG
01-06-03
UNIT: mm
Checked / Date
01-06-03
REV. C
Approved / Date
JJH / 01-06-03