848-10003 Datasheet, PDF (1/1 Pages) Qualtek Electronics Corporation – EMI FILTER

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK
ELECTRONICS AND NOT TO BE REPRODUCED FOR
OR COMMUNICATED TO A THIRD PARTY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER
OF QUALTEK ELECTRONICS.
PHYSICAL DIMENSIONS:
1
2
2.94 ± 0.02
3.34MAX
3.75MAX
SCHEMATIC:
REVISION
REV.
DESCRIPTION
B
RoHS Compliancy
C
Updated Specifications
DATE
06-01-06
08-12-08
APPROVED
DP
LY
3
Ø0.188
4
ELECTRICAL CHARACTERISTICS:
1-1. VOLTAGE RATING...................................115/250VAC
1-2. CURRENT RATING
A. @ 115 VAC..........................................10 A RMS MAX
B. @ 250 VAC...........................................8 A RMS MAX
1-3. OPERATING FREQUENCY......................50/60Hz
1-4. LEAKAGE CURRENT: EACH LINE TO GROUND
A. @ 115 VAC 60Hz............................0.45 mA MAX
B. @ 250 VAC 50Hz.............................0.90 mA MAX
1-5. HIPOT RATING (FOR ONE MINUTE)
A. LINE TO GROUND...........................2250 VDC
B. LINE TO LINE.....................................1450 VDC
1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM)
FREQ. MHz
COM. MODE dB
DIF. MODE dB
.01 .05 .10 .15 .50 1.0 5.0 10 30
2 8 12 15 20 25 40 45 40
0 1 15 25 50 50 45 45 45
L1: 40.0uH
L2: 1.2mH
C1: 0.22uF
C2: 3300+2200pF
R: 330KΩ
Dim
range
(mm)
0-1
1-6
6-18
18-50
50-120
120-250
250-500
1-7. OPERATING TEMPERATURE.................-25° TO +85° C
1-8. SAFETY:
1-9. RoHS COMPLIANT
Tolerance
+/-
(mm)
0.15
0.20
0.30
0.50
0.70
0.90
1.20
CONTROLLED
Qualtek Electronics Corp.
PPC DIVISION
Part Number: _848-10/003
Description:
EMI FILTER
Drawn / Date
B.ZHANG
01-16-02
UNIT: in
Checked / Date
01-16-02
REV. C
Approved / Date
JJH / 01-16-02