EFM32GG990 Datasheet, PDF (54/73 Pages) Qimonda AG – EFM32GG990 DATASHEET

Alternate
Functionality
0
ETM_TD2
PD4
ETM_TD3
PD5
GPIO_EM4WU0
PA0
GPIO_EM4WU1
PA6
GPIO_EM4WU2
PC9
GPIO_EM4WU3
PF1
GPIO_EM4WU4
PF2
GPIO_EM4WU5
PE13
HFXTAL_N
PB14
HFXTAL_P
I2C0_SCL
I2C0_SDA
I2C1_SCL
I2C1_SDA
PB13
PA1
PA0
PC5
PC4
LCD_BCAP_N
PA13
LCD_BCAP_P
PA12
LCD_BEXT
PA14
LCD_COM0
LCD_COM1
LCD_COM2
LCD_COM3
LCD_SEG0
LCD_SEG3
LCD_SEG4
LCD_SEG5
LCD_SEG6
LCD_SEG7
LCD_SEG8
LCD_SEG9
LCD_SEG10
PE4
PE5
PE6
PE7
PF2
PF5
PE8
PE9
PE10
PE11
PE12
PE13
PE14
Preliminary
...the world's most energy friendly microcontrollers
LOCATION
1
2
3
4
5
6
Description
PB15 PD4 PA4
Embedded Trace Module ETM data 2.
PD5 PA5
Embedded Trace Module ETM data 3.
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
High Frequency Crystal (4 - 48 MHz) negative pin. Also
used as external optional clock input pin.
High Frequency Crystal (4 - 48 MHz) positive pin.
PD7 PC7 PD15 PC1 PF1 PE13 I2C0 Serial Clock Line input / output.
PD6 PC6 PD14 PC0 PF0 PE12 I2C0 Serial Data input / output.
PB12 PE1
I2C1 Serial Clock Line input / output.
PB11 PE0
I2C1 Serial Data input / output.
LCD voltage booster (optional), boost capacitor, negative
pin. If using the LCD voltage booster, connect a 22 nF ca-
pacitor between LCD_BCAP_N and LCD_BCAP_P.
LCD voltage booster (optional), boost capacitor, positive
pin. If using the LCD voltage booster, connect a 22 nF ca-
pacitor between LCD_BCAP_N and LCD_BCAP_P.
LCD voltage booster (optional), boost output. If using the
LCD voltage booster, connect a 1 uF capacitor between
this pin and VSS.
An external LCD voltage may also be applied to this pin if
the booster is not enabled.
If AVDD is used directly as the LCD supply voltage, this
pin may be left unconnected or used as a GPIO.
LCD driver common line number 0.
LCD driver common line number 1.
LCD driver common line number 2.
LCD driver common line number 3.
LCD segment line 0. Segments 0, 1, 2 and 3 are con-
trolled by SEGEN0.
LCD segment line 3. Segments 0, 1, 2 and 3 are con-
trolled by SEGEN0.
LCD segment line 4. Segments 4, 5, 6 and 7 are con-
trolled by SEGEN1.
LCD segment line 5. Segments 4, 5, 6 and 7 are con-
trolled by SEGEN1.
LCD segment line 6. Segments 4, 5, 6 and 7 are con-
trolled by SEGEN1.
LCD segment line 7. Segments 4, 5, 6 and 7 are con-
trolled by SEGEN1.
LCD segment line 8. Segments 8, 9, 10 and 11 are con-
trolled by SEGEN2.
LCD segment line 9. Segments 8, 9, 10 and 11 are con-
trolled by SEGEN2.
LCD segment line 10. Segments 8, 9, 10 and 11 are con-
trolled by SEGEN2.
2012-09-11 - EFM32GG990FXX - d0046_Rev1.00
54
www.energymicro.com