PYX28C64 Datasheet, PDF (2/11 Pages) Pyramid Semiconductor Corporation – 8K x 8 EEPROM

PYX28C64
MAXIMUM RATINGS⁽¹⁾
Symbol
Parameter
V_CC
Power Supply Pin with
Respect to GND
V
TERM
Terminal Voltage with
Respect to GND
(up to 6.25V)
T_A
Operating Temperature
Value Unit
–0.3 to +6.25 V
–0.5 to
+6.25
V
–55 to +125 °C
Symbol Parameter
T_BIAS
Temperature Under
Bias
T_STG
Storage Temperature
P
Power Dissipation
T
I
DC Output Current
OUT
Value Unit
–55 to +125 °C
–65 to +150 °C
1.0
W
50
mA
RECOMMENDED OPERATING
TEMPERATURE AND SUPPLY VOLTAGE
Grade⁽²⁾
Military
Ambient
Temperature
–55°C to +125°C
GND
0V
V
CC
5.0V ± 10%
CAPACITANCES⁽⁴⁾
V_CC = 5.0V, T_A = 25°C, f = 1.0MHz
Symbol Parameter Conditions Typ. Unit
C_IN
C_OUT
Input Capacitance
V = 0V
IN
10 ^pF
Output Capacitance ^V_OUT ^{= 0V} 10 ^pF
DC ELECTRICAL CHARACTERISTICS
Over recommended operating temperature and supply voltage⁽²⁾
Symbol
Parameter
Test Conditions
V_IH Input High Voltage
V_IL Input Low Voltage
V_HC CMOS Input High Voltage
V_{LC CMOS Input Low Voltage}
V_OL
Output Low Voltage
(TTL Load)
I = +8 mA, V = Min.
OL
CC
P5C164
Min
Max
2.0
–0.5⁽³⁾
V_CC +0.3
0.8
V_CC –0.2
–0.5⁽³⁾
V_CC +0.5
0.2
0.4
Unit
V
V
V
V
V
V_OH
Output High Voltage
(TTL Load)
I_OH = –4 mA, V_CC = Min.
2.4
V
I_{LI Input Leakage Current}
I_LO Output Leakage Current
I_SB
Standby Power Supply
Current (TTL Input Levels)
V_CC = Max.
V_IN = GND to V_CC
V_CC = Max., CE = V_IH,
V_OUT = GND to V_CC
CE ≥ V_IH, OE = V_IL,
V_CC= Max,
f = Max., Outputs Open
–10
+10
µA
–10
+10
µA
___
3
mA
Standby Power Supply
I
SB1
Current
(CMOS Input Levels)
CE
≥
V,
HC
V_CC= Max,
f = 0, Outputs Open
V_IN ≤ V_LC or V_IN ≥ V_HC
___
250
µA
I_CC Supply Current
CE = OE =
V,
IL
WE = V_IH,
All I/O's = Open,
Inputs = V = 5.5V
CC
___
60
mA
Notes:
1. Stresses greater than those listed under MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification
is not implied. Exposure to MAXIMUM rating conditions for extended
periods may affect reliability.
2. Extended temperature operation guaranteed with 400 linear feet per
minute of air flow.
3. Transient inputs with V_IL and I_IL not more negative than –3.0V and
–100mA, respectively, are permissible for pulse widths up to 20 ns.
4. This parameter is sampled and not 100% tested.
Document # EEPROM101 REV B
Page 2 of 11