P4C188 Datasheet, PDF (1/12 Pages) List of Unclassifed Manufacturers – ULTRA HIGH SPEED 16K x 4 STATIC

P4C188/P4C188L
ULTRA HIGH SPEED 16K x 4
STATIC CMOS RAMS
FEATURES
Full CMOS, 6T Cell
High Speed (Equal Access and Cycle Times)
– 10/12/15/20/25 ns (Commercial)
– 12/15/20/25/35 (Industrial)
– 15/20/25/35/45 ns (Military)
Low Power (Commercial/Military)
– 715 mW Active – 12/15
– 550/660 mW Active – 20/25/35/45
– 193/220 mW Standby (TTL Input)
– 83/110 mW Standby (CMOS Input) P4C188
– 15 mW Standby (CMOS Input)
(P4C188L Military)
Single 5V±10% Power Supply
Data Retention with 2.0V Supply
(P4C188L Military)
Three-State Outputs
TTL/CMOS Compatible Outputs
Fully TTL Compatible Inputs
Standard Pinout (JEDEC Approved)
– 22-Pin 300 mil DIP
– 24-Pin 300 mil SOJ
– 22-Pin 290 x 490 mil LCC
DESCRIPTION
The P4C188 and P4C188L are 65,536-bit ultra high speed
static RAMs organized as 16K x 4. The CMOS memories
require no clocks or refreshing and have equal access and
cycle times. Inputs and outputs are fully TTL-compatible.
The RAMs operate from a single 5V±10% tolerance power
supply. With battery backup, data integrity is maintained for
supply voltages down to 2.0V. Current drain is typically 10
µA from a 2.0V supply.
Access times as fast as 10 nanoseconds are available,
permitting greatly enhanced system speeds. CMOS is
utilized to reduce power consumption to a low 715mW
active, 193mW standby and only 5mW in the P4C188L
version.
The P4C188 and P4C188L are available in 22-pin 300 mil
DIP, 24-pin 300 mil SOJ and 22-pin LCC packages provid-
ing excellent board level densities.
FUNCTIONAL BLOCK DIAGRAM
PIN CONFIGURATIONS
DIP (P3, D3, C3)
LCC (L3)
For SOJ pin configuration, please see end of datasheet.
Document # SRAM112 REV A
Revised October 2005
1