AND-TFT-150B-KIT Datasheet, PDF (9/13 Pages) Purdy Electronics Corporation – Open Frame Monitor

8. Installing the Monitor
8.1 Power cable connection:
Connect the power cord to the AC outlet, and connect the power to the monitor through the AC/DC
adapter.
8.2 VGA signal cable connection:
Plug one end of the 15-pin signal cable to the VGA connector at the rear of the PC system and the other
end to the Open Frame monitor.
Secure the connectors with the screws on the cable connector at both ends.
8.3 Video / S-Video Cable connection:
If required, connect Video / S-Video Cable from the Open Frame Monitor to the DVD or CCD Camera.
8.4 Switch on the power:
Switch on the power switch on the rear cover of the Open Frame Monitor.
A. VGA D-sub 15 (Female)
B. USB / RS-232 Port (For Controller)
C. S-Video (Y/C Video) In
D. Video (CVBS) In
E. DC-In (+12V_DC The DC jack core is positive)
2
This product is RoHS compliant
This technical specification is subject to change without notice