ANDPSI121GAOS-HB Datasheet, PDF (4/5 Pages) Purdy Electronics Corporation – 12.1” XGA Color p-Si TFT LCD Module

Displays
ANDpSi121GA0S-HB-KIT
Connector Pin Assignment for Interface
Recommended Inverter:
Block Diagram
CN1 Input Signal (see Notes below)
DF19L-20P-1H / Hirose Electric Co., Ltd.
Terminal
No.
Symbol
Function
1
V_DD Power Supply: +3.3V
2 V_DD Power Supply: +3.3V
3
V_SS Ground
4 V_SS Ground
5
RxIN0- Neg. LVDS differential data input (R0-R5, G0)
6 RxIN0+ Pos. LVDS differential data input (R0-R5, G0)
7
V_SS Ground
8 RxIN1- Neg. LVDS differential data input (G1-G5, B0-B1)
9
RxIN1+ Pos. LVDS differential data input (G1-G5, B0-B1)
10 V_SS Ground
11
RxIN2- Neg. LVDS differential data input (B1-B5,HS,VS,DE)
12 RxIN2+ Pos. LVDS differential data input (B1-B5,HS,VS,DE)
13
14
V_SS Ground
CLK- Clock Signal (-)
15
CLK+ Clock Signal (+)
16
17
V_SS Ground
U/D Vert. Rev. (“L” level or Open; Normal, “H” level: Rev.)
18
L/R
Horiz. Rev. (“L” level or Open; Normal, “H” level:
Rev.)
19
20
V_SS Ground
V_SS Ground
CN2 CCFL Power Source
BHR-04VS-1/Japan Solderless Terminal Mfg. Co., Ltd
1) Drivers are fabricated on the LCD glass
Terminal
No.
1
2
3
4
Symbol
VFLH1
VFLH2
NC
VFLL
Function
CCFL Power Supply (High Voltage)
CCFL Power Supply (Low Voltage)
Non Connection (open)
CCFL Power Supply (Low Voltage)
2) Connectors
CN1: DF19L-20P-1H / Hirose Electric Co., Ltd.
Notes:
Mating Connector - DF19G-20S-1F (FPC) /
DF19G-20S-1C (Cable)
Please connect GND pin to ground. Don’t use it as no-connect nor
connection with high impedance. NC terminal should be open. Take
away terminal No. 3 of the mating connector. If does not take away, it
CN2: BHR-04VS-1/Japan Solderless Terminal Mfg. Co., Ltd. may cause smoke burn of electrical parts by high voltage.
Mating Connector - SM04(4.0)B-BHS-1 / JST
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
4
Tel: [phone] • Fax: [phone] • [e-mail]
7/27/07
www.purdyelectronics.com