ANDPSI121GAOS-HB-KIT Datasheet, PDF (1/5 Pages) Purdy Electronics Corporation – 12.1” XGA Color p-Si TFT LCD Module

Displays
ANDpSi121GAOS-HB-KIT
12.1” XGA Color p-Si TFT
LCD Module
The ANDpS121GAOS-HB-KIT is 1024 x 768 Color TFT display
that utilizes new poly-silicon (p-Si) technology to provide a
brighter, thinner and lighter display with high-resolution. The p-Si
TFT technology allows the row and column LCD drivers to be
fabricated directly on the LCD glass. This eliminates the need for
discrete TAB drivers and also reduces the thickness, weight and
overall size of the display. The 12.1” XGA resolution expands
applications in such areas as electronics books and personal
digital-picture viewers.
Features
• High Luminance
• Built-in Long Life Lamps (MTTF: 50,000 h)
• Replaceable structure of lamp units
• Analog scaling board attachable to LCD backward
• Recommendable inverter attachable to LCD backward
• XGA (1024 x 768 pixels color display)
• Reverse Scan function
• Applications: electronic books and personal digital-picture
viewers
Mechanical Characteristics
Item
Outline
Dimensions
Number of
Pixels
Active Area
Viewing Area
Pixel Pitch
Weight (approx.)
Backlight
Specification
278.3 (H) x 209.0 (V) x 12.0 max (D)
1024 (H) x 768 (V)
245.8 (H) x 184.3 (V)
247.8 (H) x 186.3 (V)
0.24 (H) x 0.24 (V)
685
Twin CCFL, Sidelight type
Unit
mm
pixels
mm
mm
gram
–
Absolute Maximum Ratings
Item
Supply Voltage
FL Driving Frequency
Input Signal Voltage
Operating Ambient Temp.
Operating Temp. for Panel
Storage Temperature
Storage Humidity
(Max. Wet bulb temp = 39°C)
Symbol Min. Max. Unit
V_DD -0.3 4.0
V
V_FL
0 2.0 kV(rms)
f_FL
(0) (100) kHz
V_IN
-0.3 ^{VDD +}
0.3
V
T_op
0 50
°C
0 60
°C
T_stg -20 60
°C
–
10 90 %(RH)
Electrical Characteristics (Ta = 25°C)
Item
Supply Voltage
I_FL=6.0mA(rms)
FL Start Voltage
(Ta = 0°C)
Differential Input
Voltage
Symbol
V_DD
V_FL
Min.
3.0
TBD
Typ.
3.3
(580)
–
1400
–
V_ID
100
_
Common Mode
Input Voltage
V_CM
1.0
–
Current
Consumption
I_{DD *}
–
I_{FL **}
3.0
Pwr Consumption
I_FL=6.0mA(rms)
P
–
*: 8 color bars pattern
**: Except the efficiency of FL inverter
(220)
–
(7.7)
Max.
3.6
TBD
Unit
V
V(rms)
– V(rms)
600
mV
2.4-
(V_ID)/2
V
TBD
mA
6.0 mA(rms)
–
W
Optical Characteristics (Ta = 25°C)
Item
Sym. Min. Typ. Max. Unit
Contrast Ratio
CR 100 250 –
–
Viewing
Angle
(CR ≥ 10)
(Upper+Lower)
(Left+Right)
TBD 100 –
°
TBD 120 –
°
Response
Time
(t_ON)
(t_OFF)
t_on
–
t_off
–
– 50 ms
– 50 ms
Luminance
I_FL=6.0mA(rms)
L (280) (350) – _cd/m²
Lamp Life Time
(Notes 1,2)
MTBF
50,000
h
Note 1: Conditions: Ta = 25°C, I_FL=6.0mA(rms), continuous lighting
Note 2: Definitions of failure:
a) LCD luminance becomes half of the minimum value.
b) Lamp doesn’t light normally.
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact
Purdy Electronics before proceeding with the design of
equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7/27/07
Tel: [phone] • Fax: [phone] • [e-mail]
1
www.purdyelectronics.com