ANDPSI056ET0S-HB-KIT Datasheet, PDF (1/3 Pages) Purdy Electronics Corporation – Analog RGB Interface

Displays
ANDpSi056ET0S-HB-KIT
Analog RGB Interface
The ANDpSi056ET0S-HB-KIT is a 100% Plug in Play LCD
controller board with VESA standard RGB 8 bit supports. It
utilizes poly-silicon (psi) technology to provide a brighter, thinner
and lighter display with high-resolution and measures only 4.25”
x 4.0” x 0.35.”
Features:
• VESA standard Analog RGB 8 bit supports
–VGA (640 x 480) @60Hz, 70Hz, 75Hz
–SVGA (800 x 600) @ 60Hz, 70Hz, 75Hz
–XGA (1024 x 768) @60Hz, 70Hz, 75Hz
–SXGA (1280 x 1024) @60Hz, 70Hz, 75Hz
• Scaling engine ST Micro ADE3700
• On board LVDS interface
• Dedicated interface connectors for VGA, SVGA, XGA, &
SXGA displays
• Compact size 4.25”” x 4.0” x 0.35”, low profile components
• Internal +12V power supply
• Low profile VGA connector available
• Supports 16 million colors
• Interface TTL / LVDS
• 100% Plug in Play LCD controller board
Dimensions:
4.25” x 4.5” x 0.25”
Connector Definitions:
Con8: Touch screen connector
Con9: XGA/SXGA panel interface
Con4: VGA/SVGA panel interface
Con2: Backlight interface
Con3: +12V AC/DC Power In
J2: +12V DC internal support from PC power supply
Con6: DB15 Analog RGB standard
Con11: Analog RGB low profile connector
LCD Display Supports:
• One LVDS / Two LVDS support
• Supports VGA, SVGA, XGA, SXGA
• Panel interface TTL 12bit, 18bit, 24bit
• Panel interface LVDS: 24bit / 48bit
• Brightness control10% to 100% programmable
• Auto sync, Auto input detect, Auto setup, Auto color level
CON9: LCD Panel Data Interface
Pin2
Pin3
Pin 7
Pin 30
Pin 29
Pin 14
Pin 28
Pin 27
Pin 17
Pin 26
Pin 25
Pin 24
Pin 23
Pin 22
VDD
VDD
Vss
Rin0-
Rin0+
Vss
Rin1-
Rin1+
Vss
Rin2-
Rin2+
Vss
Rclk-
Rclk+
Red
Red
Black
Black
White
Black
Black
White
Black
Black
White
Black
Black
White
GND= Pin 7, Pin 14, Pin 17, Pin 24
VCC= Pin 1, Pin 2, Pin 3
Twisted pair
Twisted pair
Twisted pair
Single wire
Twisted pair
Single wire
Twisted pair
Single wire
Twisted pair
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7/28/07
Tel: [phone] • Fax: [phone] • [e-mail]
1
www.purdyelectronics.com