AND820HW Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Standard Bright LED Lamps

OPTOELECTRONICS
AND820HW
Standard Bright LED Lamps
AND820HW
Standard LED
T-1 Package (5 mm)
The white bright lamp is made with InGaN chip and water clear epoxy resin.
Features
• Low power consumption
• Popular T-1 diameter package
• General purpose leads
• Reliable and rugged
• Long life - solid state reliability
• Available on tape and reel
• RoHS compliant
Maximum Ratings (Ta - 25 ºC)
LED Chip
Material
Emitting Color
InGaN
White
Lens Color
Water clear
All dimensions are in mm.
Tolerance is ± 0.25 mm unless otherwise noted.
Absolute Maximum Ratings (Ta - 25 ºC)
Item
Symbol
Rating
Unit
Power Dissipation
PD
120
mW
DC Forward Current
IF
30
mA
Reverse Voltage
Reverse (Leakage) Current
Peak Current (1/10 Duty Cycle,
0.2 ms Pulse Width)
Operating Temperature Range
Storage Temperature Range
Solder Temperature
(1.6 mm from body)
Electronic Discharge
VR
IR
IF(Peak)
T OPR
T STG
T SOL
ESD.
5
V
50
μA
100
mA
-25 to +85
ºC
-40 to +100
V
Dip Soldering: 260ºC for 5 seconds
Dip Soldering: 350ºC for 3 seconds
6000
V
Electrical/Optical Characteristics at Ta=25º C
Item
Symbol
Test Condition
Luminous Intensity
IV
IF = 20 mA
Forward Voltage
VF
IF = 20 mA
CIE Chromaticity Coordinates:
X
X Axis
IF = 20 mA
CIE Chromaticity Coordinates:
Y
X Axis
IF = 20 mA
Reverse (Leakage) Current
IR
VR = 5 V
Viewing Angle
2 θ 1/2
IF = 20 mA
Minimum
4800
–
–
–
––
Typical
Maxiumum
Unit
9000
–
mcd
3.2
4.0
V
0.31
–
–
0.30
–
–
50
μA
–
20
deg
Product specifications contained herein may be changed without prior notice. It is therefore advisable to
contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 755 N. Pastoria Ave. • Sunnyvale, CA 94085
1
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
06/147/12