English
Language : 

AND6BD Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaN Ultra Bright Blue TOP LEDs
Weight: 2.0 mg
Unit: mm
AND6BD
Ultra Bright LED Lamps
AND6BD
InGaN Ultra Bright Blue TOP LEDs
Features
• RoHS Compliant
• P-LCC-2 package with optical indicator
• Compatible with automatic placement equipment
• Suitable for infrared reflow, vapor phase reflow, and
wave solder processes
• Wide viewing angle
• Low (2mA) current operation
• Inter reflector
• Ideal for (LCD) backlight and pipe applications
• Pb-Free, RoHS
Maximum Ratings (Ta = 25°C)
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact
Purdy Electronics before proceeding with the design of
equipment incorporating this product.
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temp. Range
Storage Temp. Range
Electrostatic Discharge
Peak Forward Current
(Duty 1/10 @ 1Khz)
Symbol
IF
VR
PD
TOpr
TStg
ESD
Rating
30
5
130
-40 to 85
-40 to 100
1000
IFP
100
Unit
mA
V
mW
°C
°C
V
mA
Characteristics
Symbol
Test Condition Minimum Typical Maximum
Unit
Forward Voltage
Reverse Current
Luminous Intensity
Peak Emission Wavelength
Spectral Line Half Width
Dominant Wavelength
Full Viewing Angle
VF
IR
IV
lP
∆l
ld
2 θ 1/2
IF = 20 mA
VR = 5 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
2.7
3.2
3.7
V
–
–
50
µA
90
135
180
mcd
–
468
–
nm
–
26
–
nm
–
470
–
nm
–
120
–
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
3. Absolute secure counter measures against
static electricity and surge should be taken
when handling these proucts. It is
recommended to use wrist band or antistatic
gloves when handling these LEDs.
10 sec. max.
140 - 160°C 230°C max.
more than 2 min.
4°C/sec.
max.
Time
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com
www.purdyelectronics.com
7/18/07