AND5YA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaAlP Ultra Bright Yellow Light Emission Surface Mount Package

Cathode Index
2.4±0.1
Weight: 2.0 mg
Unit: mm
R0.9±0.1
AND5YA
Ultra Bright LED Lamps: Type 2
AND5YA
InGaAlP Ultra Bright Yellow Light
Emission
Surface Mount Package
0.5±0.1
0.5±0.1
2.5±0.2
Polarity
Features
• Small package size with dome lens ^{• RoHS Compliant}
• 3.2 (l) x 2.4 (w) x 2.6 (h) size
• Suitable for REFLOW soldering
• Recommended Forward Current: 10 mA
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol
Forward Current
I_F
Reverse Voltage
V_R
Power Dissipation
P_D
Operating Temperature Range
T_Opr
Storage Temperature Range
T_Stg
Rating
25
5
100
-40 to 85
-40 to 90
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
V_F
Reverse Current
I_R
Luminous Intensity
I_V
Peak Emission Wavelength
l_P
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
Minimum
–
–
395
–
–
–
–
Typical
2.1
–
625
591
15
589
30
Maximum
2.4
25
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
10 sec. max.
140 - 160°C ^{230°C max.}
Product specifications contained herein
may be changed without prior notice.
It is therefore advisable to contact Purdy
Electronics before proceeding with the
design of equipment incorporating this
The following soldering patterns are
recommended for reflow soldering
Reflow
more than 2 min.
4°C/sec.
max.
Time
2.5 2.0 2.5
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
7/18/07