AND5SA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – GaAsP Bright Red Light Emission Surface Mount Package

Cathode Index
Weight: 2.0 mg
AND5SA
Ultra Bright LED Lamps: Type 2
Unit: mm
Product specifications contained herein may be changed without prior
notice. It is therefore advisable to contact Purdy Electronics before
proceeding with the design of equipment incorporating this product.
R0.9±0.1
AND5SA
GaAsP Bright Red Light Emission
Surface Mount Package
2.4±0.1
0.5±0.1
0.5±0.1
2.5±0.2
Features
• Small package size with dome lens
• 3.2(l) x 2.4 (w) x 2.6 (h) size
• Suitable for REFLOW soldering
• RoHS Compliant
• Recommended Forward Current: 10 mA
Maximum Ratings (T_a = 25°C)
Polarity
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Symbol
I_F
V_R
P_D
T_Opr
T_Sig
Rating
25
4
100
-30 to 85
-30 to 90
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
V_F
Reverse Current
I_R
Luminous Intensity
I_V
Peak Emission Wavelength
l_P
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
I_F = 20 mA
V_R = 4 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
Minimum
–
–
24
–
–
–
–
Typical
2.0
–
40
640
45
625
30
Maximum
2.8
100
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
10 sec. max.
140 - 160°C ^{230°C max.}
The following soldering patterns are
recommended for reflow soldering
Reflow
more than 2 min.
4°C/sec.
max.
Time
2.5 2.0 2.5
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
2-21-05