AND5PGA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – GaP Ultra Bright Pure Green Light Emission Surface Mount Package

Cathode Index
2.4±0.1
Weight: 2.0
AND5PGA
Ultra Bright LED Lamps
Unit: mm
AND5PGA
GaP Ultra Bright Pure Green Light
Emission
R0.9±0.1 _{Surface Mount Package}
0.5±0.1
0.5±0.1
2.5±0.2
Polarity
Features
• Small package size with dome lens
• 3.2 (l) x 2.4 (w) x 2.6 (h) size
• Suitable for REFLOW soldering
• Recommended Forward Current: 10 mA
• RoHS Compliant
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol Rating
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
I_F
V_R
P_D
T_Opr
T_Stg
25
5
100
-30 to 85
-30to 90
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
V_F
Reverse Current
I_R
Luminous Intensity
I_V
Peak Emission Wavelength
l_P
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
Minimum
–
–
20
–
–
–
–
Typical
2.1
–
35
555
30
560
30
Maximum
2.6
10
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
10 sec. max.
140 - 160°C ^{230°C max.}
Product specifications contained herein may be
changed without prior notice. It is therefore
advisable to contact Purdy Electronics before
proceeding with the design of equipment
incorporating this product.
The following soldering patterns are
recommended for reflow soldering
Reflow
more than 2 min.
4°C/sec.
max.
Time
2.5 2.0 2.5
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail]
www.purdyelectronics.com
7/18/07