AND5OA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaAIP Ultra Bright Orange Light Emission Surface Mount Package

Cathode Index
2.4±0.1
Weight: 2.0
Unit: mm
R0.9±0.1
AND5OA
Ultra Bright LED Lamps
AND5OA
InGaAIP Ultra Bright Orange Light
Emission
Surface Mount Package
0.5±0.1
0.5±0.1
2.5±0.2
Polarity
Features
• Small package size with dome lens
• 3.2 (l) x 2.4 (w) x 2.6 (h) size
• Suitable for REFLOW soldering
• RoHS Compliant
• Recommended Forward Current: 10 mA
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol
Forward Current
I_F
Reverse Voltage
V_R
Power Dissipation
P_D
Operating Temperature Range
T_Opr
Storage Temperature Range
T_Stg
Rating
30
4
100
-30 to 85
-30to 90
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
V_F
Reverse Current
I_R
Luminous Intensity
I_V
Peak Emission Wavelength
l_P
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
I_F = 20 mA
V_R = 4 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
Minimum
–
–
490
–
–
–
–
Typical
2.1
–
750
620
18
615
30
Maximum
2.8
100
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
10 sec. max.
140 - 160°C ^{230°C max.}
Product specifications contained herein may be
changed without prior notice. It is therefore
advisable to contact Purdy Electronics before
proceeding with the design of equipment
incorporating this product.
The following soldering patterns are
recommended for reflow soldering
Reflow
more than 2 min.
4°C/sec.
max.
Time
2.5 2.0 2.5
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] www.purdyelectronics.com
6/12/07