|
AND5GA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – GaP Ultra Bright Green Light Emission Surface Mount Package | |||
|
Cathode Index
Weight: 2.0
AND5GA
Ultra Bright LED Lamps: Type 2
Unit: mm
Product speciï¬cations contained herein may be changed without prior
notice. It is therefore advisable to contact Purdy Electronics before
proceeding with the design of equipment incorporating this product.
R0.9±0.1
AND5GA
GaP Ultra Bright Green Light Emission
Surface Mount Package
2.4±0.1
0.5±0.1
0.5±0.1
2.5±0.2
Polarity
Features
⢠Small package size with dome lens ⢠RoHS Compliant
⢠3.2 (l) x 2.4 (w) x 2.6 (h) size
⢠Suitable for REFLOW soldering
⢠Recommended Forward Current: 10 mA
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol Rating
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
IF
VR
PD
TOpr
TStg
25
5
60
-40 to 85
-40to 90
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
VF
Reverse Current
IR
Luminous Intensity
IV
Peak Emission Wavelength
lP
Spectral Line Half Width
âλ
Dominant Wavelength
λd
Full Viewing Angle
θ
IF = 20 mA
VR = 5 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
IV = 1/2 Peak
Minimum
â
â
75
â
â
â
â
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reï¬ow solder: recommended condition is as follows:
10 sec. max.
140 - 160°C 230°C max.
Typical
2.1
â
125
570
30
571
30
Maximum
2.4
10
â
â
â
â
â
Unit
V
µA
mcd
nm
nm
nm
degree
The following soldering patterns are
recommended for reflow soldering
Reflow
more than 2 min.
4°C/sec.
max.
Time
2.5 2.0 2.5
Purdy Electronics Corporation ⢠720 Palomar Avenue ⢠Sunnyvale, CA 94085
Tel: 408.523.8200 ⢠Fax: 408.733.1287 ⢠sales@purdyelectronics.com ⢠www.purdyelectronics.com
7/18/07
|
▷ |