AND520HW Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Ultra Bright LED Lamps

Weight: 0.31g
Unit: mm
AND520HW
Ultra Bright LED Lamps
AND520HW
InGaN High Brightness White Light Emission
• 5 mm (T1-3/4) Package
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• Wide viewing angle - 30º
• High reliability
• Pb Free - RoHS Compliant
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol
Forward Current
I_F
Reverse Voltage
V_R
Power Dissipation
P_D
Operating Temperature Range
T_Opr
Storage Temperature Range
T_Sig
Pulse Forward Current
I_FP
(Duty Cycle 1/10 @ 1kHZ)
–
Electrostatic Discharge
ESD
Soldering Temp (Time ≤ 5 Sec) T_Sol
Rating
30
5
100
-40 to 85
-40 to 100
100
–
4,000
260 ± 5
Unit
mA
V
mW
C
C
mA
–
V
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
Reverse Current
Luminous Intensity
Chromaticity Coordinates
Full Viewing Angle
V_F
I_R
I_V
x
y
2 θ 1/2
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
Minimum
–
–
2,850
–
–
–
Typical
3.5
–
4,000
.29
.28
25
Maximum
4.0
50
–
–
–
–
Unit
V
µA
mcd
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260 C max.
Soldering time: 5 sec. max.
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is
recommended to use wrist band or antistatic gloves when handling these LEDs.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
2/11/08