AND4YA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaAlP Ultra Bright Yellow Light Emission Surface Mount Package

AND4YA
Ultra Bright LED Lamps: Type 2
Weight: 2.0 mg
Unit: mm
AND4YA
Cathode
Index
1.25
InGaAlP Ultra Bright Yellow Light Emission
1.1
Surface Mount Package
0.6
Features
• Small package size
• 2.0 (l) x 1.25 (w) x 1.1 (h) size
• Suitable for DIP and REFLOW soldering
• Recommended Forward Current: 10 mA
• RoHS Compliant
Polarity
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol
Forward Current
I_F
Reverse Voltage
V_R
Power Dissipation
P_D
Operating Temperature Range
T_Opr
Storage Temperature Range
T_Stg
Rating
25
5
70
-40 to 85
-40 to 90
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition Minimum
Typical Maximum
Unit
Forward Voltage
V_F
I_F = 20 mA
–
2.1
2.4
V
Reverse Current
I_R
V_R = 5 V
–
–
10
µA
Luminous Intensity
I_V
I_F = 20 mA
58
80
–
mcd
Peak Emission Wavelength
l_P
I_F = 20 mA
–
591
–
nm
Spectral Line Half Width
∆λ
I_F = 20 mA
–
15
–
nm
Dominant Wavelength
λd
I_F = 20 mA
–
589
–
nm
Full Viewing Angle
θ
I_V = 1/2 Peak
–
140
–
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
10 sec. max.
140 - 160°C ^{230°C max.}
Product specifications contained herein may be
changed without prior notice. It is therefore
advisable to contact Purdy Electronics before
proceeding with the design of equipment
incorporating this product.
The following soldering patterns are
recommended for reflow and dip soldering
Reflow
more than 2 min.
Time
4°C/sec.
max.
1.2 0.9 1.2
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
7/18/07