AND4RA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – GaAlAs Ultra Bright Red Light Emission Surface Mount Package

Anode
Index
AND4RA
Ultra Bright LED Lamps: Type 2
Weight: 2.0 mg
Unit: mm _{Product specifications contained herein may be changed without prior}
notice. It is therefore advisable to contact Purdy Electronics before
proceeding with the design of equipment incorporating this product.
1.25
1.1
0.6 _AND4RA
GaAlAs Ultra Bright Red Light Emission
Surface Mount Package
Features
• Small package size
• 2.0 (l) x 1.25 (w) x 1.1 (h) size
• Suitable for DIP and REFLOW soldering
• Recommended Forward Current: 10 mA
• RoHS Compliant
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol Rating
Unit
R0.2
Polarity
Electro-Optical Characteristics (T_a = 25°C)
Forward Current
I_F
40
mA
Reverse Voltage
V_R
5
V
Power Dissipation
P_D
110
mW
Operating Temperature Range
T_Opr
-40 to 85
°C
Storage Temperature Range
T_Sig
-40 to 90
°C
Characteristics
Symbol
Test Condition Minimum
Typical Maximum
Unit
Forward Voltage
V_F
I_F = 20 mA
–
1.7
2.4
V
Reverse Current
I_R
V_R = 5 V
–
–
10
µA
Luminous Intensity
I_V
I_F = 20 mA
20
40
–
mcd
Peak Emission Wavelength
l_P
I_F = 20 mA
–
660
–
nm
Spectral Line Half Width
∆λ
I_F = 20 mA
–
20
–
nm
Dominant Wavelength
λd
I_F = 20 mA
–
643
–
nm
Full Viewing Angle
θ
I_V = 1/2 Peak
–
140
–
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
140 - 160°C ^{230°C max.}
10 sec. max.
The following soldering patterns are
recommended for reflow soldering
Reflow
more than 2 min.
4°C/sec.
max.
Time
1.2 0.9 1.2
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
6/12/07